Low temperature storage tank supply for Shandong national standard liquid oxygen storage tank gas filling station
Category:
mechanical equipment/Storage and transportation equipment/storage tank
Model:
CFL10-0.8
Brand:
Zhongjie Special Equipment
model:
CFL10-0.8
material:
stainless steel
classification:
Vertical flat bottomed plastic storage tank
capacity:
nine point five
storage location:
Ground storage tank
Product Usage:
Storage tank
Placement method:
Vertical storage tank
structural form:
vertical
Processing & Customization:
yes
Applicable materials:
Oxygen nitrogen argon liquid
volume:
nine point five
Overall dimensions:
2316-5981
self-weight:
six thousand eight hundred and ten
Place of Origin:
Heze, Shandong
type:
Anti corrosion storage tank
manufacturer:
Shandong Zhongjie Equipment
Retail Price
154,000.00USD
重量
kg
- Product Description
-
model CFL10-0.8
material stainless steel
classification Vertical flat bottomed plastic storage tank
capacity nine point five
storage location Ground storage tank
Product Usage Storage tank
Placement method Vertical storage tank
structural form vertical
Processing & Customization yes
Applicable materials Oxygen nitrogen argon liquid
volume nine point five
Overall dimensions 2316-5981
self-weight six thousand eight hundred and ten
Place of Origin Heze, Shandong
type Anti corrosion storage tank
manufacturer Shandong Zhongjie Equipment
Description :
1Low temperature liquid oxygen storage tankThe installation site should have good ventilation and should generally be installed outdoors with fences around. There should be no open flames, flammable or explosive materials within 5 meters;
2. Low temperature liquid oxygen storage tanks need grounding equipment and lightning protection equipment to eliminate static electricity. The anti-static grounding resistance shall not exceed 10 Ω; The impact resistance of lightning protection equipment is 30 Ω, and it should be tested at least once a year;
3. The filling rate of low-temperature liquid oxygen storage tanks shall not exceed 95% to prevent excessive filling;
4. The pressure gauge of the low-temperature liquid oxygen storage tank is of a prohibited oil type and is calibrated regularly; It is necessary for safety valves to be made of stainless steel or copper, regularly calibrated, and strictly degreased;
5. When valves, pipelines, etc. on the equipment freeze, use 70-80 ℃ nitrogen, air, or hot water to freeze and prevent open flame heating;

6. When there is liquid in the storage tank, hot work repair is prohibited. It is necessary to heat it up to room temperature before repairing;
7. Operators must undergo training and pass the examination before they can take up their posts. Do not wear synthetic clothing with oil stains or electrostatic effects, and do not wear shoes with nails. The valve should be opened and closed slowly during operation. When not in use, the pressure boosting valve should be tightly closed;
8. It is necessary to have someone monitor the pressure and not exceed it;
9. Low temperature liquids are not allowed to splash onto unmaintained skin to avoid attacks;
10. When the low-temperature liquid oxygen storage tank has been emptied of liquid, the valve cannot be opened because the temperature inside the tank is very low, and humid air will enter the interior through the connected pipeline, causing an accident of freezing and blocking the pipeline.








AfterSalesService :
Key words:- National standard liquid oxygen storage tank
More Products