Shandong thermal oil boiler price supply Weifang 2-ton boiler gas thermal oil boiler

Description :

　　one thermal oil boilerIs the thermal oil in the middle important?

　　The heat transfer oil in the heat transfer oil furnace is an important part, and if there is a problem with the heat transfer oil, it will affect the normal use and operation of the boiler, thereby affecting the effectiveness of the boiler. So, it should be taken seriously, and it is also important to know that low-temperature heat transfer oil should be dehydrated, otherwise the water in the heat transfer oil will escape and cause fluctuations in boiler pressure, leading to problems.

　　2. Whythermal oil boilerAfter stopping the pump, the heat transfer oil cannot stop flowing? Can the pump be stopped earlier?

　　After the pump of the heat transfer oil furnace is stopped, the heat transfer oil cannot flow in the heating furnace because if the heat transfer oil does not flow, the heat in the heating furnace will raise the temperature of the heat transfer oil. If it reaches the capacity of the oil, it will shorten the service life of the oil and also affect the normal operation of the boiler. In addition, the heat transfer oil furnace should not stop the pump too early, as this will cause the heat transfer oil to deteriorate.

　　3. Are there any precautions for the high-level tank and oil-gas separator of the thermal oil boiler?

　　There are some precautions to be taken for the high-level tank and oil gas separator in the heat transfer oil furnace. The main ones are that the height of the high-level tank should not be too low, and the size of the oil gas separator should not be too small. Otherwise, the temperature of the high-level tank cannot be lowered, and the heat transfer oil will be oxidized, affecting the thermal conductivity of the heat transfer oil furnace. In addition, coking problems may also occur in the furnace of the boiler.

　　What standards should be referred to and implemented for thermal oil boilers? Can two thermal oil furnaces be used together?

　　The standards that should be referred to and implemented for a heat transfer oil furnace boiler are TSG G0001-2012 "Boiler Safety Technical Supervision Regulations" and SY/T 0524-2008 "Heat Transfer Oil Heating Furnace System Specification". In addition, two thermal oil furnaces can be used together, usually one for backup and one for use. The weld seam at the pipeline connection must be confirmed to be of qualified quality.

AfterSalesService :

• Price of thermal oil boiler