Maintenance of Liquid Oxygen Storage Tanks - National Standard - Manufacturers of Liquid Oxygen Storage Tanks
Category:
mechanical equipment/Storage and transportation equipment/storage tank
Model:
CFL10-0.8
Brand:
Zhongjie Special Equipment
model:
CFL10-0.8
material:
stainless steel
classification:
Vertical flat bottomed plastic storage tank
capacity:
nine point five
storage location:
Ground storage tank
Product Usage:
Storage tank
Placement method:
Vertical storage tank
structural form:
vertical
Processing & Customization:
yes
Applicable materials:
Oxygen nitrogen argon liquid
volume:
nine point five
Overall dimensions:
2316-5981
self-weight:
six thousand eight hundred and ten
Place of Origin:
Heze, Shandong
type:
Anti corrosion storage tank
manufacturer:
Shandong Zhongjie Equipment
Retail Price
158,000.00USD
重量
kg
- Product Description
-
model CFL10-0.8
material stainless steel
classification Vertical flat bottomed plastic storage tank
capacity nine point five
storage location Ground storage tank
Product Usage Storage tank
Placement method Vertical storage tank
structural form vertical
Processing & Customization yes
Applicable materials Oxygen nitrogen argon liquid
volume nine point five
Overall dimensions 2316-5981
self-weight six thousand eight hundred and ten
Place of Origin Heze, Shandong
type Anti corrosion storage tank
manufacturer Shandong Zhongjie Equipment
Description :
To makeliquid oxygen storage tankIn good working condition, it is necessary to regularly inspect certain components of the liquid oxygen storage tank. For example, if the liquid oxygen storage tank is constantly working in extremely hot or cold temperature environments, the maintenance cycle should be shortened.
1. The pressure gauge and safety valve of the liquid oxygen storage tank should be calibrated regularly. Pressure gauges should be calibrated every six months, and safety valves should be calibrated every year. Pressure gauges and safety valves that have exceeded their calibration validity period are prohibited from use.
2. Regularly monitor the evaporation rate of liquid oxygen storage tanks. When the evaporation rate exceeds three times the requirements of the drawing, a comprehensive inspection must be conducted to identify the cause of the problem, and maintenance should be carried out in conjunction with the equipment manufacturer.
3. Regularly check the vacuum level of the interlayer. If the vacuum level rises above 15Pa, it is necessary to vacuum again. The vacuum pumping of liquid oxygen storage tanks should be implemented by the employing unit or the original manufacturing unit.
Regularly check the frost on the surface of the storage tank. If there is frost on the surface of the storage tank, it indicates that the pearl sand has sunk and should be replenished with pearl sand.
Regularly check the sealing condition of the valve. Tighten the copper nut near the copper nut to solve the leakage. Close the valve and remove the copper nut for inspection. If the PTFE gasket is damaged, replace it.
AfterSalesService :
Key words:- Maintenance of Liquid Oxygen Storage Tanks
More Products
