Jilin 6-ton gas steam boiler consulting manufacturer provides high-quality services

Description :

　　Gas boiler, as the name suggests, is a gas energy-saving equipment that provides hot water and heating for enterprises by burning combustible gases. It is a device for enterprises to use hot water for heating. Today, the price of gas boilerThe manufacturer tells you:Three reasons why companies choose gas boilers!

　　The reason why enterprises choose gas boilers is that the cost of using gas boilers is low. In terms of energy use alone, coal prices are much higher than gas costs! In addition, gas boilers do not require any certificates, boiler rooms, or boiler workers, which saves a lot of costs for gas boilers. Saving money is a reason why companies choose gas boilers!

　　The second reason why enterprises choose gas boilers is the safety of gas boilers. Unlike coal-fired boilers, gas boilers have the function of automatically adjusting high pressure, which avoids safety accidents that may occur due to long-term use, boiler aging, or improper operation by boiler workers. Security is the guarantee for the development of enterprises, and only stable and safe enterprises can continuously move forward!

　　The last reason why companies choose gas boilers is because of their timeliness. To put it simply, gas boilers may successfully help companies avoid risks caused by environmental issues!

　　A steam boiler is a thermal equipment that uses the heat energy released after fuel combustion or the waste heat from industrial production to transfer to the water in a container, making the water reach the required temperature (hot water) or a certain pressure of steam. It is a complete unit composed of a "pot" (i.e. the pressure bearing part of the steam boiler body), a "furnace" (i.e. the combustion equipment part), accessory instruments, and accessory equipment. A steam boiler operates simultaneously in both the "pot" and "furnace" parts. After water enters the steam boiler, the heat absorbed by the heating surface of the steam boiler is transferred to the water in the steam water system, heating the water into hot water of a certain temperature and pressure or generating steam, which is then extracted for application. In the combustion equipment section, fuel combustion continuously releases heat, and the high-temperature flue gas generated by combustion transfers heat to the heating surface of the steam boiler through heat propagation, while its temperature gradually decreases and is then discharged through the chimney. The "pot" and "furnace" are closely related as a whole equipment, with one absorbing heat and the other releasing heat.

　　Fuel gas boilerstructural characteristics

　　Compared with coal-fired boilers, oil (gas) boilers have the following structural characteristics due to the use of different fuels:

　　Fuel is injected into the boiler furnace through a burner and burned in a fire chamber without the need for grate facilities;

　　Since neither oil nor gas produces ash residue after combustionOil (gas) boilerNo slag discharge outlet and slag removal equipment;

　　If the atomized oil, gas or gas sprayed into the furnace is extinguished or mixed with air within a certain range, it is easy to form explosive gasesOil (gas) boilerAll require the use of automated combustion systems, including flame monitoring, flameout protection, explosion-proof and other safety facilities;

　　Due to the fact that the heat generated by oil and gas is much greater than that of coal, its furnace heat intensity is much higher than that of coal-fired boilers. Therefore, compared with coal-fired boilers of the same capacity, the boiler has a smaller volume, a more compact structure, and a smaller footprint;

　　fiveOil (gas) boilerThe combustion process is suspended in the furnace, so there is no need to set up front and rear arches in the furnace, and the furnace structure is very simple.

　　Incoming inspection of raw materials for gas boiler manufacturing

　　（1） Raw material acceptance upon arrival at the factory

　　After the materials arrive, the material quality inspector checks the conformity of the content of the quality certificate with the relevant standards.

　　2. The material quality inspector should verify whether the supplier is a qualified supplier of our company, and check the material's brand, specifications, model, furnace number, batch number, surface quality and dimensional deviation, and whether the packaging labeling is consistent with the quality certificate and relevant standards.

　　3. After inspection, qualified materials will be issued a "Qualified Material Storage Notice" to notify the warehouse to handle the storage. Sampling shall be carried out according to the prescribed items and methods for on-site re inspection (physical and chemical, metallographic), and relevant non-destructive testing or physical and chemical laboratories shall be commissioned for testing or inspection.

　　4. Implement the "Nonconforming Product (Item) Control Procedure" for the receipt of unqualified raw materials based on experience

　　The enterprise is highly focused on the green energy special equipment industry and is a manufacturing enterprise of special equipment for boilers and pressure vessels. The leading products include: fuel (gas) boilers, biomass boilers, waste heat boilers, coal-fired boilers, organic heat carrier boilers and other boiler products; Vacuum insulated cryogenic pressure vessels such as LNG storage tanks, oxygen nitrogen argon storage tanks, CO2 storage tanks, etc; Storage tanks, liquid ammonia storage tanks, denitrification and auxiliary equipment, heat exchangers, complete sets of chemical equipment, stainless steel pressure vessels, refrigeration auxiliary equipment and other pressure vessel products.

AfterSalesService :

• Gas steam boiler