Spot RB-94S-1 High Pressure Fan 15kw/380V High Power Double bladed Wheel High Pressure Fan

　　Dimensions: 786 * 615 * 657 Inlet and outlet diameter: 4 inches (100)

　　Installation precautions:

　　1. Flat washers and spring washers must be used to tighten screws;

　　2. It is essential to use rubber buffer to bear the weight of vortex fans, especially high-power vortex fans;

　　3. For certain occasions where noise is required, noise reduction * can be installed to reduce noise (usually around 5dB), and the noise reduction * can be installed at the end of the inlet or outlet duct;

　　4. For certain situations where high noise requirements are needed, a layer of soundproofing foam can be added based on the machine's own conditions to meet the on-site noise requirements. For specific details, please consult the manufacturer of the vortex fan or *'s noise control company;

　　5. When using sound-absorbing foam, pay attention to the distance between the vortex fan and the box, the ventilation and heat dissipation of the vortex fan, and the use of rubber buffer to bear the weight of the vortex fan. For specific details, please consult the manufacturer of the vortex fan, such as the Haoguan high-pressure fan

　　6. The inlet and outlet pipes of the vortex fan should be connected using hoses to isolate vibration.