316L Ball Ring Packing DN50 Ball Ring Various Bulk Packing Ball Ring Manufacturers

Description :

　　Produced by Dier Chemical Packing Co., Ltd. in Pingxiang City, Jiangxi ProvinceBall ring packingIt is a type of annular packing with equal height and diameter openings. It is based on the Rascal ring packing and has windows with inward extending tongue blades on the ring wall. Each layer of window holes has 5 or more tongue blades, and each tongue blade is bent inward towards the center of the ring. The positions of the upper and lower layers of window holes are opposite and staggered. Generally, the opening area accounts for about 30% of the total area of the ring wall. Without increasing the surface area of the packing, the flow of gas-liquid two-phase in the packing layer was greatly improved, and the fluid dynamics and mass transfer performance of the packing were enhanced.

　　Regardless of the orientation of the Bao'er ring installed in the tower, the liquid sprayed onto the packing material flows along the outer wall, passes through the small window towards the inner wall, and flows along the blades towards the center. In this way, the dispersion of the liquid increases, and the utilization rate of the inner surface of the filler is improved. The blade retains the original wall surface and adds a new surface for the incision, resulting in a larger specific surface area than before the window was opened. The curved blades towards the center of the ring increase the turbulence level of the gas, and the staggered opening of windows reduces the stagnation dead zone between adjacent fillers. Therefore, the gas-liquid distribution of the Bower ring is more uniform than that of the Rascal ring, and the contact area between the two phases increases, resulting in an increase in mass transfer efficiency. In addition, the Bauer ring maintains a constant mass transfer efficiency over a wide range of gas velocities.

　　Dier Chemical Packing is used to produce packing materials for petrochemical equipment and environmental protection equipment;

　　Plastic loose packing: Ball ring, stepped ring, saddle ring, conjugate ring, Rascal ring, flower wreath, polyhedral hollow ball, floating ball, plastic snowflake ringEnvironmental BallAlpha ring, Laru ring, three combinations of one filler, etc;

　　The above finished products are made of materials such as PP/PVC/CPVC/PVDF/PTFE/flame retardant materials, etc

　　Metal loose packing materials: Ball rings, stepped rings, saddle rings, conjugate rings, Raschig rings, Entrox rings, aluminum flower garlands, 84 inner arc rings, flat rings, double-layer conjugate rings, etc.

　　The above finished products are made of materials such as 304/304L/316/316L/duplex steel/urea grade stainless steel, etc

　　Ceramic bulk packing: Ball ring, stepped ring, saddle ring, conjugate ring, Rascal ring, cross partition ring, etc.

　　Regular packing: plastic/metal/ceramic orifice plate corrugated, perforated corrugated and wire mesh corrugated packing, etc.

　　Tower internals packing: trough platedistributorChannel distributor, tube distributor, hump support, bubble cover tray, fog catcher, wire mesh demister, wavy wire mesh demister, grid packing, support, pressure grid, clamp, gasket, etc;

　　Dier Chemical Packing Co., Ltd. in Pingxiang City, Jiangxi Province can produce various products according to customer needs and provide a comprehensive system of design, production, and installation services; Please consult the sales department for details;

　　Jiangxi Pingxiang Dier Chemical Packing Co., Ltd. has always been committed to the business philosophy of focusing on product quality and after-sales service, emphasizing long-term development, pursuing win-win cooperation, and ensuring satisfaction and peace of mind for all customers! If you have any questions, please contact our customer service staff so that we have the opportunity to become your business partner.

AfterSalesService :

• Stainless steel ball ring