Distributor Manufacturer Stainless Steel Plastic Liquid Distributor

Description :

　　distributorThe liquid distributor of the manufacturer (Dier Chemical Packing Co., Ltd., Pingxiang City, Jiangxi Province) is an extremely critical internal component in the packing tower, which not only affects the mass transfer efficiency of the packing, but also has an impact on the operational elasticity of the packing. In order to reduce the amplification effect caused by poor liquid distribution and fully utilize the efficiency of the packing, it is necessary to install a liquid distributor in the packing tower to evenly distribute the liquid at the top of the packing layer. The quality of the initial distribution of liquid not only affects the mass transfer efficiency of the packing, but also has an impact on the operational elasticity of the packing. There are many types of distributors, and the selection criteria mainly include distribution quality, operational flexibility, processing capacity, gas resistance, levelness, and many other aspects The function of a liquid distributor is to evenly distribute or redistribute the liquid at the top of the packing or at a certain height, in order to improve the effective surface for mass and heat transfer, enhance interfacial contact, and thus improve the efficiency of the tower.

　　1. Divided by distributor fluid dynamics: gravity type liquid distributor (hole type, weir type, pressure type liquid distributor, spray type, porous tube type)

　　2. According to the shape of the distributor, it can be divided into tube type, double-layer pipe arrangement, groove type, disc type, impact type, nozzle type, pagoda type, lotus canopy type, combination type, etc.

　　3. According to the form of liquid leaving the distributor, it can be divided into orifice flow type and overflow type.

　　4. Divided by the frequency of liquid distribution: single-stage, multi-stage.

　　5. Divided by distributor combination: pipe groove type, hole groove type, groove disc type

　　The poor distribution of liquids in the filling tower is divided into large-scale and small-scale. Small scale poor distribution is caused by liquid channel flow in the packing layer, while large-scale poor distribution is caused by liquid distributor, which will seriously reduce the efficiency of the entire tower. The higher the filling efficiency, the greater the impact of liquid distribution quality on the performance of fillers. For example When the liquid distribution mass reaches 50%, the theoretical number of plates per meter of packing is equal to 20, and the actual theoretical number of plates is only 11.5. However, for packing with a theoretical number of plates per meter of packing equal to 8, the actual theoretical number of plates is only 5.5.

　　Dier Chemical Packing Co., Ltd. in Pingxiang City, Jiangxi Province has been engaged in research, development, and design of various tower internals for many years. The types of separators produced are also very diverse, and can be made according to customer requirements. The small diameter can reach about 500mm, and the large diameter can reach 13000mm. It can also produce various materials (stainless steel, plastic, ceramics) according to the needs of customers' devices.

　　The following is a DN5200mm trough distributor customized by a Jiangsu customer in our company. It has been completed on schedule according to the customer's requirements and is currently being prepared for shipment.

　　Our company (Jiangxi Pingxiang Dier Chemical Packing Co., Ltd.) is committed to providing customers with satisfaction and peace of mind; Our company has been signing long-term technical cooperation agreements with more than 10 domestic chemical research units for many years, and has hired senior technical management personnel from Tsinghua University and Tianjin to provide product design, processing and production, installation, and after-sales service.

AfterSalesService :

• Distributor manufacturer