Honeycomb inclined tube packing, honeycomb straight tube packing, stainless steel plastic PP packing, manufacturer
Category:
chemical industry/Mass transfer equipment/Filler/Filler
Model:
Aperture DN40 DN50 DN80
Brand:
Dier Chemical Packing Co., Ltd., Pingxiang City, J
Retail Price
5,800.00USD
重量
kg
- Product Description
-
Description :
1) Product Description:
The honeycomb inclined tube packing produced by Dier Chemical Packing Co., Ltd. in Pingxiang City, Jiangxi Province is mainly used for various sedimentation and sand removal purposes. The materials mainly include PVC, FRP, all plastic, stainless steel, etc. It is a widely used water treatment device in water supply and drainage engineering in the past decade. It has the advantages of wide applicability, high processing efficiency, and small footprint. Suitable for water inlet sand removal, general industrial and domestic water sedimentation, sewage sedimentation, oil separation, and sludge concentration treatment. It is suitable for both new construction projects and the renovation of existing old ponds, and can achieve good economic benefits.
2) Product parameters: Honeycomb inclined tube packing
Single piece filler thickness δ:
0.2mm, 0.3mm, 0.4mm, 0.5mm, etc
Specifications (length x width x diagonal length):
According to the requirements of the demand party
Stacking angle:
60°~ 70°
Horizontal flow velocity:
2.5~ 3 mm/s
Effective load:
3 ~ 5 T/m2·h
Stay time:
4.5 ~ 6 min
3) Product specification: Honeycomb inclined tube packing
Preface
number
Model (measured in R)
φ（mm）
surface area
（m2/ m3）
porosity
（%）
Weight (kg/m3)
Calculated based on a sheet thickness of 0.4mm and a material of 304 stainless steel
one
forty
one hundred and forty-eight
ninety-six point eight
two hundred and fifteen
two
fifty
one hundred and eighteen
ninety-seven point four
two hundred and three
Material: Stainless steel honeycomb inclined plate packing is made of stainless steel SS30408, S30403, 321, 316, 316L, duplex stainless steel 2205, etc. The product material density is 7.93-8.03g/cm3. Stainless steel is resistant to high temperatures, has good processing performance, high toughness, good corrosion resistance, heat resistance, low temperature strength and mechanical properties, and can be used at temperatures ranging from -196 ℃ to 800 ℃. Corrosion resistant in the atmosphere.
Product Features:
1. The wet area is large and the hydraulic radius is small.
2. The laminar flow state is good, and particle settling is not affected by floc flow interference.
When the length of the inclined pipe is 1 meter, the effective load is designed at 3-5 tons per square meter per hour. V0 is controlled within the range of 2.5-3.0 millimeters per second, resulting in better effluent quality.
4. When using honeycomb inclined pipes at the water intake with a length of 2.0-3.0 meters, they can safely operate and treat high turbidity with a mud and sand content of 50-100 kg/m3.
5. Adopting inclined tube sedimentation tank, its processing capacity is 3-5 times that of horizontal flow sedimentation tank, and 2-3 times that of accelerated clarification tank and pulse clarification tank.
Dier Chemical Packing Co., Ltd. in Pingxiang City, Jiangxi Province has been engaged in research, development, and design of various tower internals products, as well as plastic, metal, ceramic bulk and regular packing materials for many years. We can produce various materials according to customer needs:
Our company (Jiangxi Pingxiang Dier Chemical Packing Co., Ltd.) is committed to providing customers with satisfaction and peace of mind; Our company has been signing long-term technical cooperation agreements with more than 10 domestic chemical research units for many years, and has hired senior technical management personnel from Tsinghua University and Tianjin to provide product design, processing and production, installation, and after-sales service.
AfterSalesService :
Key words:- Honeycomb inclined tube packing
More Products
