Stainless steel saddle ring IMTP packing metal Interlock packing DN40 saddle ring 304 316L

Description :

　　The stainless steel saddle ring 304 saddle ring packing and stainless steel IMTP packing produced by Dier Chemical Packing Co., Ltd. in Pingxiang City, Jiangxi Province, comply with the standard

　　Product Introduction: The metal saddle ring, also known as Interlox packing abroad, is mostly made of stainless steel 201, 202, 301, 304, 321, 316, 316L and other stainless steel materials. The steel strips are sliced and stamped, and those made from these stainless steel materials are collectively referred to as stainless steel saddle rings. Its shape is between circular and saddle shaped, thus having the advantages of both. Structurally, the metal rectangular saddle ring enhances the annular rib on the saddle shaped foundation, avoiding overlap and ensuring a certain strength and rigidity. By punching a few small claws, it enhances the agitation of the liquid and mass transfer, resulting in unique performance, making it one of the good bulk packing materials today.

　　Product application scope and occasions: The application effect is quite good in industrial facilities such as refining, petroleum, coal chemical, fine chemical, environmental protection, medicine, steel, coking, etc. If a Φ 50 metal saddle is used in the dewaxing phenol refining extraction tower of a refinery, and a Φ 50 ceramic stepped ring is used to increase the ring packing, the processing energy can be increased by 15% -20%, and the yield can be increased by 1-2%, resulting in improved refined oil The use of Dg50 metal saddle ring packing (304, δ=1) in the de methane tower, de ethane tower, condensate stripping vacuum distillation tower, vacuum distillation tower, and vacuum distillation tower in ethylene production plants, as well as in the vacuum distillation tower of refineries, has shown significant effects. In the production of lubricating oil, the vacuum distillation tower uses Dg50 metal saddle ring packing (304, δ=1), and in the heat exchange plate section of the vacuum tower at a diameter of 4.2 meters, the metal saddle ring is used, which has good performance and significantly reduces pressure drop. Through operation, it has been shown that it can adapt to various operating conditions of the vacuum tower regardless of start-up or normal production, with great operational flexibility. When starting or encountering production fluctuations, the top of the vacuum tower can achieve normal operation in a short period of time.

　　Our company produces metal saddle rings made of various materials such as 304, 304L, 316L, titanium, duplex steel, 2507, etc. The specifications of the metal saddle rings include DN25, DN38, DN40, DN50, DN76, etc. The saddle rings have teeth and no teeth. Our company has a dedicated mold production workshop that can develop various models and specifications required for mold production according to customer requirements.

　　Stainless steel 304 saddle ring packing is mainly used in crude oil vacuum distillation, high vacuum distillation, olefin separation, isomer separation, extraction distillation, etc. This packing combines the advantages of annular packing and saddle packing. It has the characteristics of pressure reduction, high flux, high efficiency, and good fluid redistribution performance within the packing layer. Filling method of stainless steel saddle ring packing

　　The stainless steel 316L rectangular saddle ring structure adds annular ribs on the saddle foundation to avoid overlap and ensure certain strength and rigidity. Several small claws are punched out to increase gas-liquid agitation and enhance mass transfer, resulting in unique performance. The use of metal saddle rings can increase yield, reduce energy consumption or costs, and improve separation efficiency. Metal saddle ring packing has lower flux and pressure drop compared to metal step ring and Bauer ring packing, and its mass transfer efficiency is also lower.

　　Dier Chemical Packing Co., Ltd. in Pingxiang City, Jiangxi Province has been engaged in research, development, and design of various tower internals products, as well as plastic, metal, ceramic bulk and regular packing materials for many years. We can produce various materials according to customer needs:

　　Our company (Jiangxi Pingxiang Dier Chemical Packing Co., Ltd.) is committed to providing customers with satisfaction and peace of mind; Our company has been signing long-term technical cooperation agreements with more than 10 domestic chemical research units for many years, and has hired senior technical management personnel from Tsinghua University and Tianjin to provide product design, processing, production, installation, and services.

AfterSalesService :

• Stainless steel saddle ring