Tray distributor 304 distributor Liquid distributor Gas liquid distributor Manufacturer

Description :

　　The trough plate distributor produced by Dier Chemical Packing Co., Ltd. in Pingxiang City, Jiangxi Province is an internal reflux liquid distributor with excellent comprehensive performance

　　Low occupancy, multifunctional;

　　Block and stop with liquid;

　　Raise the liquid level, high elasticity;

　　Suitable for extraction and flash evaporation;

　　Uniform liquid and balanced gas;

　　Efficient heat transfer and resistant to oscillation;

　　Mixed well, constant level;

　　Leak proof and deformation resistant;

　　Net canal fluid, suitable for reaction;

　　Pressure decreases, flux increases;

　　Widely applicable and cost-effective.

　　Tray type gas-liquid distributor: a new development of tray type liquid distributors. The reason why it is called a trough plate gas-liquid distributor is because it is a disc distributor composed of several distribution trough gauges sorted and welded together, which plays a role in collecting, distributing, distributing, and side line extraction,.

　　Structural features:

　　The trough plate gas-liquid distributor is composed of a rectangular riser, or a channel steel shaped liquid guide pipe, a liquid guide pipe (liquid guide angle steel), a dovetail or channel steel shaped liquid blocking air cap, a plate, a support ring, and a support beam. The main difference between it and the disc liquid distributor is that the two rows of small holes, one large at the top and the other small at the bottom, are respectively opened in the upper, middle, and lower parts of the rectangular chimney. The small holes with different diameters on the same vertical line are covered by angle steel or channel steel shaped liquid conduits. The liquid in the tray enters the liquid guide tube through the spray hole, and under the protection of the liquid guide tube, the liquid passes through the high gas velocity zone and the variable gas velocity zone, and falls from the low gas velocity zone. Therefore, the extension length of the liquid guide tube is taken as 100mm. Research and practice have proven that the product breaks through the difficulties of "mist entrainment" and "rising film entrainment" by allowing the gas-liquid to flow in two separate directions due to the dovetail wind cap and liquid guide tube. As the opening form and liquid level change, there is no entrainment phenomenon when the gas kinetic energy factor in the riser increases from 7 to 15. When the kinetic energy factor F of the gas in the riser is ≥ 3.87, all the liquid flowing out from the small hole with a diameter of 3 to 8mm without a liquid guide tube will be entrained; Uniform product distribution: uniform drip collection, symmetrical extraction on both sides, large depth of liquid layer, small liquid level drop, geometric uniform distribution of spray points, and excessive level of spray holes, thus ensuring uniform liquid distribution; In addition to the excellent performance mentioned above, the trough plate gas-liquid distributor also has advantages such as uniform gas distribution, pressure reduction, high elasticity, and liquid level rise.

　　Dier Chemical Packing Co., Ltd. in Pingxiang City, Jiangxi Province has been engaged in research, development, and design of various tower internals products, as well as plastic, metal, ceramic bulk and regular packing materials for many years. We can produce various materials according to customer needs:

　　Our company (Jiangxi Pingxiang Dier Chemical Packing Co., Ltd.) is committed to providing customers with satisfaction and peace of mind; Our company has been signing long-term technical cooperation agreements with more than 10 domestic chemical research units for many years, and has hired senior technical management personnel from Tsinghua University and Tianjin to provide product design, processing and production, installation, and after-sales service.

AfterSalesService :

• Trough distributor