304 orifice corrugated packing 250Y stainless steel corrugated packing metal regular packing for desulfurization tower

Description :

　　The metal 316L 304 orifice plate corrugated packing produced by Dier Chemical Packing Co., Ltd. in Pingxiang City, Jiangxi Province: Regular packing has the characteristics of low resistance, uniform gas-liquid distribution, high efficiency, large flux, and unclear amplification effect, and is applied in negative pressure, atmospheric pressure, and pressurized operations.

　　Corrugated packing is a universal structured packing, which is a disc-shaped packing composed of many corrugated thin plates. It has a compact structure and regular arrangement, and its specific surface area can be adjusted according to the shape of the corrugated structure; There are two main angles of inclination between the corrugations and the tower axis: 30 ° and 45 °. Each tray of packing is vertically installed inside the tower, and adjacent corrugated plates are stacked in reverse during assembly. The adjacent trays of packing are arranged in a staggered 90 ° manner. This mutually perpendicular arrangement continuously changes the direction of the rising airflow, and the descending liquid is also redistributed. The fluid is fully mixed inside the tower, resulting in high mass transfer efficiency.

　　Corrugated regular packingThe packed tower and its production process are important gas-liquid mass transfer equipment in chemical separation processes. The packing is installed inside the packing tower and is the core component of the tower. It provides a contact surface for gas-liquid two-phase heat and mass transfer, and is widely used in chemical fields such as refining, petrochemicals, fine chemicals, food, medicine, and environmental protection. Corrugated packing is a common and widely used chemical packing material.

　　The pressure increasing pattern on the surface of the corrugated packing of the orifice plate enhances the wetting performance of the packing, improves the utilization rate of the specific surface area of the packing, promotes the continuous renewal of the gas-liquid contact surface, and improves the mass transfer efficiency. Some customers have different processes and do not require embossing, which results in faster and smoother gas-liquid flow rates.

　　Product Technical Parameters:

　　Product Application:

　　The 250Y metal orifice plate corrugated packing produced by Dier Chemical Packing Co., Ltd. in Pingxiang City, Jiangxi Province is mainly used in the petrochemical industry, fertilizer industry, natural gas purification, smelting, etc. Such as in coal chemical industry (washing tower for recovering crude benzene in coking plant), separation of ethylbenzene and ethylene, preparation of high-purity oxygen, separation of epichlorohydrin, de butane tower, cyclohexane recovery, gasoline distillation, atmospheric and vacuum refining and other equipment.

　　The metal fillers produced by our company are mainly made of carbon steel, stainless steel, aluminum alloy, titanium and special alloy materials as raw materials. They have the advantages of thin wall, light weight, cold and hot resistance, high porosity, high flux, low pressure reduction, low resistance, good separation effect, and long service life. They can be used under high temperature, high pressure, and high impact strength;

　　Carbon steel filler is a low-cost raw material for the production of metal fillers, and has good wetting properties on the surface. It should be prioritized for use in non corrosive or low corrosive systems. However, if carbon steel is used in corrosive environments, it may rust; Stainless steel packing has strong corrosion resistance and can generally withstand corrosion from rare substances other than Cl -, but it has a high cost and good performance; Fillers made of materials such as titanium and special alloy steel have a high cost and are generally only used in certain highly corrosive systems.

　　Stainless steel fillers have much higher compressive strength than plastic and ceramic fillers, and the compressive strength of fillers is their ability to resist plastic deformation at a certain temperature. It is not only related to the material of the filler, but also closely related to its structural dimensions and processing technology. The main factors affecting the impact performance of metals are chemical composition, heat treatment, grain size, metallographic structure, and other mechanical properties. For carbon steel, as the carbon content increases, the strength and hardness correspondingly increase, while the plasticity and impact values decrease.

　　The corrosion resistance of metal fillers is inferior to that of plastic and ceramic fillers. It is easily corroded by water, atmosphere, and various organic or inorganic solvents, which to some extent limits its range of use. And compared to ceramic and plastic fillers, metal fillers are expensive.

　　Dier Chemical Packing Co., Ltd. in Pingxiang City, Jiangxi Province can produce various materials according to customer needs: Ball rings, stepped rings, saddle rings, conjugate rings, Rascal rings, flower garlands, multi-faceted hollow balls, floating balls, plastic snowflake ringsEnvironmental BallYingteluos, orifice plate corrugated packing, wire mesh corrugated packing and tower internals, trough distributor, gas-liquid distributor, wire mesh demister, hump support, packing grid pressure grid, float valve tray, bubble cover tray, etc

　　Dier Chemical Packing Co., Ltd. in Pingxiang City, Jiangxi Province can produce various products according to customer needs and provide a comprehensive system of design, production, and installation services; Please consult the sales department for details;

AfterSalesService :

• 304 orifice corrugated packing