Metal Ball Ring Packing Titanium TA2 Ball Ring Stainless Steel Bulk Packing Regular Packing Manufacturer

Description :

　　Titanium alloy is an alloy composed of titanium as the basis and other elements added. Titanium has two types of homogeneous and heterogeneous crystals: alpha titanium with a close packed hexagonal structure below 882 ℃, and beta titanium with a body centered cubic structure above 882 ℃.

　　Titanium is an important structural metal developed in the 1950s. Titanium alloys have high strength, good corrosion resistance, and high heat resistance. In the 1950s and 1960s, the main focus was on developing high-temperature titanium alloys for aircraft engines and structural titanium alloys for aircraft bodies. A batch of corrosion-resistant titanium alloys were developed in the 1970s, and since the 1980s, corrosion-resistant titanium alloys and high-strength titanium alloys have been further developed. Titanium alloy is mainly used to make compressor components for aircraft engines, followed by structural components for rockets, missiles, and high-speed aircraft. Therefore, metalBall ring packingThe cost of a Ball ring made of titanium material is much higher compared to confirmed metal materials.

　　In April 2020, a certain technology company in Shanghai ordered a batch of DN76 * 76 * 0.8 thick Bao'er ring packing from our company, with a quantity of 6 cubic meters. Our company is currently working overtime in processing and production.

　　The metal Bao'er ring produced by Dier Chemical Packing Co., Ltd. in Pingxiang City, Jiangxi Province has made significant improvements to the Rasi ring. Two rows of window holes with internal tongue plates have been opened on the ring wall, which improves gas-liquid distribution and fully utilizes the inner surface of the ring. Compared with Rasi ring, the processing capacity can be increased by more than 50%, while the pressure is reduced by half. Ball ring is a three-dimensional filling material formed by opening ten rectangular small windows on the side wall of a metal ring, with the window blades of the window holes bent into the center of the ring, overlapping at the center of the ring, and the positions of the upper and lower windows interlocking with each other. Large effective specific surface area, no clumping, no clogging, long service life, and can also be reused, making production operation management simple.

　　The metal ball ring produced by Dier Chemical Packing Co., Ltd. in Pingxiang City, Jiangxi Province has the characteristics of low pressure drop, high flux, and high efficiency. HYPAK packing has lower pressure drop and higher mass transfer efficiency compared to PALL rings of the same size, and the liquid distribution in the packing layer is better.

　　Product Technical Parameters:

　　Product Application:

　　The Bao'er ring produced by Dier Chemical Packing Co., Ltd. in Pingxiang City, Jiangxi Province is suitable for use as contact packing in carbon dioxide degassing towers, ozone contact reaction towers, and other reaction towers

　　Product Features:

　　The main characteristics of Bao'er Ring produced by Dier Chemical Packing Co., Ltd. in Pingxiang City, Jiangxi Province are:

　　1. High air velocity, multiple blades, low resistance

　　2. The specific surface area is large, which can fully solve the problem of gas-liquid exchange.

　　3. Bauer ring has the characteristics of high production capacity, low resistance, and high operational flexibility.

　　Ball ring packing has the advantages of high flux, low resistance, high separation efficiency, and high operational flexibility. Under the same pressure reduction, the processing capacity can be more than 50% larger than that of Rascal ring. At the same processing capacity, pressure reduction can be reduced by half, and mass transfer efficiency can be improved by about 20%. Compared with Raschig ring, this type of packing has the characteristics of high production capacity, strong resistance, and high operational flexibility. In general, when the pressure drop is the same, it can be processed 50% -99.9% higher than Raschig ring, and 50% -70% lower than Raschig ring when processed. The tower height can also be reduced, and using Ball ring can save 20% -40% of packing volume compared to Raschig ring.

　　Bao'er ring packing packaging method: woven bag;

　　Bao'er ring packing transportation method: truck transportation;

　　Material: PP/PVC/CPVC/PVDF/PTFE, etc;

　　Material: 304/304L/316/316L/duplex steel/titanium, etc;

　　Dier Chemical Packing Co., Ltd. in Pingxiang City, Jiangxi Province has been engaged in research, development, and design of various tower internals products, as well as plastic, metal, ceramic bulk and regular packing materials for many years. We can produce various materials according to customer needs:

　　Our company (Jiangxi Pingxiang Dier Chemical Packing Co., Ltd.) is committed to providing customers with satisfaction and peace of mind; Our company has been signing long-term technical cooperation agreements with more than 10 domestic chemical research units for many years, and has hired senior technical management personnel from Tsinghua University and Tianjin to provide product design, processing and production, installation, and after-sales service.

AfterSalesService :

• metal pall ring