Stainless steel mesh corrugated packing 316L wire mesh corrugated packing regular packing plastic orifice plate corrugated packing

Description :

　　The metal mesh (mesh plate) corrugated packing unit is assembled from stainless steel mesh corrugated sheets The packing is arranged in a uniform geometric pattern in the tower, which defines the gas-liquid flow path and improves the phenomena of channel flow and wall flow Due to the unique capillary action of the wire mesh and the more effective wetting performance of the surface area, it has low pressure drop and less liquid holding capacity, thus having high separation efficiency. Especially suitable for difficult to separate and thermosensitive systems. Widely used in various fields such as petrochemicals (such as catalytic cracking and distillation sections in refineries), fertilizers, natural gas, biochemistry, environmental engineering, etc. The diameter of the tower equipment reaches 6 meters, and its separation performance is higher than that of corrugated packing with metal orifice plates. Suitable for operating temperature of 400 ℃, with no temperature limit for low-temperature operation Mesh wave hole packing has high efficiency due to its large specific surface area. The regular diamond shaped mesh is covered by a liquid film, and the uneven surface enhances the turbulence, mixing, and surface renewal of the liquid film. It is an internal component mainly suitable for gas-liquid mass transfer equipment. This filler is suitable for clean systems with a temperature range of less than or equal to 400 ℃ and does not contain solid particles or suspended solids.

　　Dier Chemical Packing is used to produce packing materials for petrochemical equipment and environmental protection equipment;

　　Plastic loose packing: Ball ring, stepped ring, saddle ring, conjugate ring, Rascal ring, flower wreath, polyhedral hollow ball, floating ball, plastic snowflake ringEnvironmental BallAlpha ring, Laru ring, three combinations of one filler, etc;

　　The above finished products are made of materials such as PP/PVC/CPVC/PVDF/PTFE/flame retardant materials, etc

　　Metal loose packing materials: Ball rings, stepped rings, saddle rings, conjugate rings, Raschig rings, Entrox rings, aluminum flower garlands, 84 inner arc rings, flat rings, double-layer conjugate rings, etc.

　　The above finished products are made of materials such as 304/304L/316/316L/duplex steel/urea grade stainless steel, etc

　　Ceramic bulk packing: Ball ring, stepped ring, saddle ring, conjugate ring, Rascal ring, cross partition ring, etc.

　　Regular packing: plastic/metal/ceramic perforated plate corrugated, mesh corrugated, perforated corrugated, and wire mesh corrugated packing, etc.

　　Tower internals packing: trough distributor, trough distributor, tubular distributor, hump support, bubble cover tray, fog catcher, wire mesh demister, wavy wire mesh demister, grid packing, support, pressure grid, clamp, gasket, etc;

　　Dier Chemical Packing Co., Ltd. in Pingxiang City, Jiangxi Province can produce various products according to customer needs and provide a comprehensive system of design, production, and installation services; Please consult the sales department for details;

　　We will exchange your utmost trust and satisfaction with the most reasonable prices and the best service quality.

AfterSalesService :

• Stainless steel mesh corrugated packing