SW type mesh packing wire mesh corrugated packing board 304 corrugated packing PP350Y corrugated packing

Description :

　　The main feature of metal mesh corrugated packing for methanol distillation tower is to directly punch and stretch stainless steel or other metal plates into smaller diamond mesh plates, which are then punched into ripples and assembled into packing disks. This packing material combines the technical and economic advantages of metal wire mesh corrugated packing and metal orifice plate corrugated packing to develop a new type of tower internals that is both efficient and cost-effective. Due to its large specific surface area, it has high efficiency. The regular diamond shaped mesh is covered by a liquid film, and the uneven surface enhances the turbulence, mixing, and surface renewal of the liquid film. It is an internal component mainly suitable for gas-liquid mass transfer equipment. This filler is suitable for clean systems with a temperature range of less than or equal to 400 ℃ and does not contain solid particles or suspended solids.

　　The stainless steel mesh corrugated packing produced by Dier Chemical Packing Co., Ltd. in Pingxiang City, Jiangxi Province is used for filtration in the packing tower of the chemical industry and is an auxiliary device. It is mainly composed of mesh sheets and zip ties. The required size for cutting mesh sheets should be arranged in order and tied tightly with zip ties. This utility model has a high theoretical number of plates per meter of packing material, which is easy to form a series and saves production materials. It can reduce costs by 30% compared to wire mesh packing material. The processing technology is simple, the rigidity and strength are high, it is not easy to deform, and the bearing capacity is large. It is suitable for use in packing towers with larger diameters.

　　Metal wire mesh corrugated packing, metal orifice plate corrugated packing, metal mesh corrugated packing. Advantages and disadvantages of these three types of metal structured fillers:

　　1. Although metal wire mesh corrugated packing has high efficiency, high flux, low resistance, and low liquid holding capacity, it is expensive, afraid of corrosion, and has a limited applicability, making it unsuitable for large-scale industrial applications.

　　2. Although stainless steel orifice plate corrugated packing has low cost, high flux, and low resistance, the theoretical number of plates per meter of packing is not large, and it consumes a lot of materials.

　　3. Stainless steel mesh corrugated packing has the characteristics of high packing strength, high flux, low pressure drop, large specific surface area, and high separation efficiency. The effect is significant in the pre distillation tower and main distillation tower applied to methanol distillation units. The use of this filler can save energy, improve product quality, and increase production. In the renovation of the old tower, the output can be increased by 30%. In new projects, the tower height can be reduced by half. Reducing infrastructure and saving energy consumption by over 30% has achieved certain economic benefits.

　　Dier Chemical Packing is used to produce packing materials for petrochemical equipment and environmental protection equipment;

　　Plastic loose packing: Ball ring, stepped ring, saddle ring, conjugate ring, Rascal ring, flower wreath, polyhedral hollow ball, floating ball, plastic snowflake ringEnvironmental BallAlpha ring, Laru ring, three combinations of one filler, etc;

　　The above finished products are made of materials such as PP/PVC/CPVC/PVDF/PTFE/flame retardant materials, etc

　　Metal loose packing materials: Ball rings, stepped rings, saddle rings, conjugate rings, Raschig rings, Entrox rings, aluminum flower garlands, 84 inner arc rings, flat rings, double-layer conjugate rings, etc.

　　The above finished products are made of materials such as 304/304L/316/316L/duplex steel/urea grade stainless steel, etc

　　Ceramic bulk packing: Ball ring, stepped ring, saddle ring, conjugate ring, Rascal ring, cross partition ring, etc.

　　Regular packing: plastic/metal/ceramic orifice plate corrugated, perforated corrugated and wire mesh corrugated packing, etc.

　　Tower internals packing: trough distributor, trough distributor, tubular distributor, hump support, bubble cover tray, fog catcher, wire mesh demister, wavy wire mesh demister, grid packing, support, pressure grid, clamp, gasket, etc;

　　Dier Chemical Packing Co., Ltd. in Pingxiang City, Jiangxi Province can produce various products according to customer needs and provide a comprehensive system of design, production, and installation services; Please consult the sales department for details;

　　We will exchange your utmost trust and satisfaction with the most reasonable prices and the best service quality.

AfterSalesService :

• SW type mesh packing