BX500 wire mesh packing 316L regular packing 304 wire mesh regular packing metal wire mesh packing
Category:
chemical industry/Mass transfer equipment/Filler/Filler
Model:
five hundred
Brand:
Dier Chemical Packing Co., Ltd., Pingxiang City, J
Retail Price
6,500.00USD
重量
kg
- Product Description
-
Description :
The BX500 wire mesh corrugated packing produced by Dier Chemical Packing Co., Ltd. in Pingxiang City, Jiangxi Province is composed of wire mesh sheets arranged in a corrugated manner, with a corrugated sheet inclination angle of 30 degrees or 45 degrees; Adjacent corrugated sheets have opposite directions, and when filling inside the tower, the upper and lower packing plates are staggered and stacked at a 90 degree angle. It has the advantages of high efficiency, pressure reduction, and high flux. The products include BX and CY types, which are commonly used in vacuum distillation, atmospheric distillation, and absorption processes for difficult to separate and thermosensitive substances;
productTechnical Specifications：
model
Peak Height
mm
specific surface area
㎡/m3
Theoretical plate number
I/m
void ratio
%
pressure drop
Mpa/m
F factor
M/s(kg/m3)0.5
CY700
four point three
seven hundred
8-10
eighty-seven
4.5-6.5×10-4
1.3-2.4
BX500
six point three
five hundred
4.5-5.5
ninety-five
3.0×10
two
250 type
twelve
two hundred and fifty
2-3
ninety-seven
1.5-2×10-4
two point six
productfeature：
(1) High number of theoretical plates, high flux, and reduced pressure;
(2) Good low load performance, the theoretical number of plates increases with the decrease of gas load, and there is almost no low load limit;
(3) High operational flexibility;
(4) The amplification effect is not easy to understand;
(5) Can meet the requirements of precision, large, and high vacuum distillation equipment. The distillation separation of difficult to separate systems, thermosensitive systems, and high-purity products provides favorable conditions.
Dier Chemical Packing Co., Ltd., Pingxiang City, Jiangxi Provinceproductionmetalwire meshCorrugated packingMainly used in distillation systems, methanol and other equipment. Most domestic co distillation manufacturers use the double tower distillation process, with almost all main and pre distillation towers using plate structures. Although the investment is low, the tower height, low operational flexibility, and complex structure make installation and maintenance very difficult; High energy consumption increases the consumption of crude methanol, water, electricity, steam, etc. in actual production, which greatly weakens the competitiveness of products. Moreover, there are many control points, complicated operations, delayed reaction of process indicators, long adjustment time, and unstable product quality After careful consideration, a double tower distillation process has been developed, but the core equipment is a new type of packed distillation tower with both the main and pre towers. The high-efficiency stainless steel wire mesh corrugated packing is used as the packing inside the tower, which has the advantages of large specific surface area, strong liquid distribution ability, low tower resistance, high mass and heat transfer efficiency, large operational flexibility, and easy installation and maintenance And it can reduce the height of the main and pre towers by one-third Therefore, in actual production, the product has good quality, low consumption, easy operation, fast adjustment of process indicators, and at the same time, the product also has strong competitiveness
AfterSalesService :
Key words:- BX500 wire mesh filler
More Products
