Stainless steel tube distributor, row tube distributor, trough plate distributor

Description :

　　Stainless steel tube distributor, row tube distributor, trough plate distributor

　　Our company's stainless steel tubular distributor is assembled from a main pipe and a small pipe. The small pipes are connected to the large pipes and arranged in sequence, hence it is also called a tubular distributor. Small holes are uniformly punched out on the small pipes for liquid distribution. The liquid enters through the main pipe and is then distributed to each small pipe. The liquid is sprayed down from the holes in the small pipes, achieving uniform distribution of the liquid.

　　Picture of tubular distributor:

　　productfeature:

　　1. Superior liquid distribution performance, suitable for situations with multiple spray points and low liquid loads

　　2. It is required that there are no solid particles in the material, and a filter screen should be installed at the inlet of the riser

　　3. The tubular liquid distributor has good operational flexibility

　　In situations with high operational flexibility, a double row tube liquid distributor can be used

　　5. Suitable for use in large, medium, and small towers

　　The pipe distributor is used in conjunction with the regular packing tower, so it is placed on the fixed grid plate of the regular packing bed and fixed with a pressure plate or clamp. Due to the non geometrically uniform distribution of small holes on the distributor, the relative positions of the distributor's liquid distribution pipe, bed fixed grid plate, and the corrugated sheet of the packing below it need to be arranged reasonably. The fixed grid plate is pressed tightly against each packing piece to prevent it from loosening and to ensure the reasonable distribution of liquid in the distribution pipe. It must be considered simultaneously during design. In general, the liquid distribution pipe is installed vertically with the packing sheet, but sometimes a rotation of 45 degrees is more reasonable. The distance between the liquid distribution pipe and the upper end of the packing depends on the specific situation, usually around 50mm.

　　Our company produces a wide variety of distributors, including trough plate distributors, trough distributors, liquid distributors, tubular distributors, anti hump distributors, etc. We can also design and produce according to customer requirements, and the materials can be made into PP/304/304L/316/316L/duplex steel/titanium, etc;

　　Dier Chemical Packing Co., Ltd. was established in 2004 in Pingxiang City, Jiangxi Province. It is a key centralized enterprise for the production of chemical packing materials under the former Ministry of Chemical Industry. It is a member of the National Chemical (Technology, Information) Center Station, a member of the China Petroleum and Chemical Survey and Design Association, and a network cooperative enterprise of central enterprises such as PetroChina, Sinopec, ChemChina, and CNNC The company launched the second phase of the new model in July 2017Environmentally friendly fillersThe project of tower internals equipment is located in the New Third Board Industrial Park of the development zone, covering an area of 45 acres, with a total investment of 100 million yuan, a registered capital of 98 million yuan, fixed assets of 50 million yuan, and more than 200 employees, including 26 middle and senior technical personnel. It produces 18 series and more than 100 types of products including metal, ceramic, plastic fillers, tower internals, and chemical equipment. At the same time, it has hired three chemical tower internals design PhDs from Tsinghua University, Tianjin University, and South China University of Technology to provide strong technical support for the company's product quality, tower internals design, production, and new product development. There are more than 20 independently invented patents, which meet the needs of serving chemical and environmental protection enterprises. They produce a series of tower internals and chemical packing products, which are sold to coking chlor alkali, fertilizer, chemical, salt, pharmaceutical, refining, sulfuric acid, electricity, environmental protection, coking and other manufacturers across the country with good usage effects. In 2008, they obtained the self operated import and export rights for foreign trade, and their products are exported to more than ten countries including Israel, France, the United States, South Korea, Germany, Brazil, Japan, etc.

AfterSalesService :

• Stainless steel tubular distributor