250Y orifice plate corrugated packing 316L corrugated plate packing PP regular packing for desulfurization
Category:
chemical industry/Mass transfer equipment/Filler/Filler
Model:
250Y
Brand:
Dier Chemical Packing Co., Ltd., Pingxiang City, J
Retail Price
4,200.00USD
重量
kg
- Product Description
-
Description :
250Y orifice plate corrugated packing 316L corrugated plate packing PP regular packing for desulfurization
1) Product Description:
The 250Y orifice plate corrugated packing produced by Dier Chemical Packing Co., Ltd. in Pingxiang City, Jiangxi Province is composed of several metal corrugated sheets arranged in parallel and vertically. The corrugated sheets have small holes with a top angle of about 900 degrees, and the channels formed by the corrugations are at a 45 degree or 30 degree angle to the vertical direction. Adjacent corrugated flow channels are arranged at a 90 degree angle, and the upper and lower corrugated packing plates are stacked by rotating 90 degrees. In the tower with a smaller diameter connected by flanges, the corrugated packing plates are made into whole disks with a diameter slightly smaller than the inner diameter of the tower. In the tower with a larger diameter, each plate of corrugated packing is divided into several pieces and placed into the tower through a manhole. Inside the tower, they are assembled into complete disks. The corrugated sheets of the upper and lower plates of packing are rotated 90 degrees to install them, allowing the fluid to mix thoroughly inside the tower.
2) Product Performance Introduction:
The 250Y metal orifice plate corrugated packing produced by Dier Chemical Packing Co., Ltd. in Pingxiang City, Jiangxi Province is made by stamping various metal thin plates with a thickness of 0.15-0.20mm. The plate is punched with small holes of diameter 4mm and several fine seams about 5mm long, which enhances the wetting performance and may form bidirectional permeation. The opening rate is about 9-12%. The perforated plate surface has a special texture to improve the effective mass transfer area. Its separation ability is similar to that of wire mesh corrugated packing, but its anti blocking ability is stronger than that of corrugated packing.
3) Product Technical Parameters:
model
Peak height mm
specific surface area
Theoretical plate number
Void ratio%
pressure drop
F factor
Sm125
twenty-four
one hundred and twenty-five
1-1.2
ninety-eight point five
1.5×10-4
three
SM250
twelve
two hundred and fifty
2-3
ninety-seven
1.5-2×10-4
two point six
SM350
eight
three hundred and fifty
3.5-4
ninety-five
1.5×10-4
two
Sm450
six point five
four hundred and fifty
4-4.5
ninety-three
1.8×10-4
one point five
4) Product application:
The 250Y metal orifice plate corrugated packing produced by Dier Chemical Packing Co., Ltd. in Pingxiang City, Jiangxi Province is mainly used in the petrochemical industry, fertilizer industry, natural gas purification, smelting, etc. Such as in coal chemical industry (washing tower for recovering crude benzene in coking plant), separation of ethylbenzene and ethylene, preparation of high-purity oxygen, separation of epichlorohydrin, de butane tower, cyclohexane recovery, gasoline distillation, atmospheric and vacuum refining and other equipment.
Packaging method for corrugated packing of metal orifice plate: cardboard box;
Transportation method of corrugated packing for metal orifice plate: truck transportation;
Material: PP/PVC/CPVC/PVDF/PTFE, etc;
Material: 304/304L/316/316L/duplex steel/titanium, etc;
Dier Chemical Packing Co., Ltd. in Pingxiang City, Jiangxi Province has been engaged in research, development, and design of various tower internals products, as well as plastic, metal, and ceramic bulk and regular packing materials for many years. We can produce corrugated plate packing materials of various materials, models, and sizes according to customer needs. The following is the customer's order for orifice corrugated packing from our company.
Dier Chemical Packing Co., Ltd. in Pingxiang City, Western Province, is a manufacturer that produces and sells three major materials: metal packing, plastic packing, ceramic packing, and tower internal distributors. Our company has signed long-term technical cooperation agreements with more than 10 domestic chemical research units for many years and has hired senior technical management personnel from Qinghua and Tianjin to design, process, produce, install, and provide after-sales service for our products. Please consult the sales department for details; We will exchange your utmost trust and satisfaction with the most reasonable prices and the best service quality.
AfterSalesService :
Key words:- 250Y orifice plate corrugated packing
More Products
