Efficient packing stainless steel 252Y 352Y regular packing wire mesh packing

Description :

　　GEM series efficient packing introduction efficient packing stainless steel 252Y 352Y regular packing wire mesh packing

　　GEM series corrugated high-efficiency packing is a new type of structured packing with excellent comprehensive performance developed based on the excellent combination of ordinary corrugated plate structured packing and Intalox bulk packing. Compared with ordinary metal plate corrugated packing, this packing has the advantages of pressure reduction, large processing capacity, and high mass transfer efficiency. The packing structure is shown in the following figure:

　　The structural characteristics of this filler are as follows:

　　(1) Compared with ordinary packing, this packing has a straight edge corrugated packing set at the top and bottom respectively, which makes the gas-liquid flow channel between adjacent packing layers more smooth, reduces the flow resistance of gas-liquid two-phase, and thus has advantages such as high flux and low pressure drop;

　　(2) Appropriately increasing the porosity enables the wetting of the areas on both sides of the metal plate corrugation and more complete vapor-liquid contact and exchange, effectively improving the utilization rate of the specific surface area of the packing and thus having a high mass transfer efficiency;

　　(3) The alternating combination structure of straight edge ripples and inclined ripples enhances the disturbance of the gas-liquid phase, improves the mass transfer driving force, reduces the mass transfer resistance, and further improves the processing capacity and mass transfer efficiency.

　　GEM series packing structure parameters

　　Dier Chemical Packing is used to produce packing materials for petrochemical equipment and environmental protection equipment;

　　Plastic loose packing: Ball ring, stepped ring, saddle ring, conjugate ring, Rascal ring, flower wreath, polyhedral hollow ball, floating ball, plastic snowflake ringEnvironmental BallAlpha ring, Laru ring, three combinations of one filler, etc;

　　The above finished products are made of materials such as PP/PVC/CPVC/PVDF/PTFE/flame retardant materials, etc

　　Metal loose packing materials: Ball rings, stepped rings, saddle rings, conjugate rings, Raschig rings, Entrox rings, aluminum flower garlands, 84 inner arc rings, flat rings, double-layer conjugate rings, etc.

　　The above finished products are made of materials such as 304/304L/316/316L/duplex steel/urea grade stainless steel, etc

　　Ceramic bulk packing: Ball ring, stepped ring, saddle ring, conjugate ring, Rascal ring, cross partition ring, etc.

　　Regular packing: plastic/metal/ceramic orifice plate corrugated, perforated corrugated and wire mesh corrugated packing, etc.

　　Tower internals packing: trough distributor, trough distributor, tubular distributor, hump support, bubble cover tray, fog catcher, wire mesh demister, wavy wire mesh demister, grid packing, support, pressure grid, clamp, gasket, etc;

　　Dier Chemical Packing Co., Ltd. in Pingxiang City, Jiangxi Province can produce various products according to customer needs and provide a comprehensive system of design, production, and installation services; Please consult the sales department for details;

　　We will exchange your utmost trust and satisfaction with the most reasonable prices and the best service quality.

AfterSalesService :

• Corrugated high-efficiency packing