Plastic packing camel hump support LQPZ support tower internals manufacturer Pingxiang Dier

Description :

　　Plastic packing camel hump support LQPZ support tower internals manufacturer Pingxiang Dier

　　The characteristics of our company's hump support are:

　　(1) Good rigidity, allows for large loads, and can reliably withstand various pressures applied to it.

　　(2) Has excellent fluid dynamics performance. The gas and liquid channels are separated, and the gas phase is sprayed towards the packing layer through the side openings on the support plate, while the liquid phase flows towards the lower packing layer through the openings at the bottom of the support plate. Therefore, the gas-liquid flow is unobstructed and evenly distributed, which can also avoid mutual entrainment between the gas-liquid and allow for high gas-liquid flux. The liquid spray density can reach up to 240m3/m3h, and the pressure drop during normal operation is about 62Pa, which is less than 200Pa.

　　(3) Filling particles or fragments are not easy to block the hole opening. For filling materials smaller than DN25, a layer of 300mm high large filling material can be first laid on the support plate, and then small filling materials can be stacked.

　　(4) Lightweight and material saving. It can be made of materials such as metal, plastic, ceramics, etc.

　　(5) The single unit combination structure is easy to install from the manhole.

　　(6) The three-dimensional structure of the support plate is conducive to increasing the opening area, making the opening area more on the left and right. The principle of opening area is that the opening rate must be greater than the porosity of the packing layer, otherwise the support plate forms a "bottleneck" zone, reducing the tower load. The opening area is related to the structure, material, and tower diameter, generally accounting for 70% of the tower section.

　　Our company (Dier Chemical Packing Co., Ltd., Pingxiang City, Jiangxi Province) aims to meet the various equipment and process requirements of our customers and reduce costs. In addition to metal materials, the camel hump supports produced also include plastic material camel hump supports. The following production image is a 2.5-meter diameter hump support made of FRPP material ordered by a customer in Jiangsu from our company. The production process is to first customize the thickness of the sheet metal according to the customer's purchase, cut it according to the drawing, punch it into a mesh shape, then use a bending machine to fold it, and then weld it, as shown in the picture:

　　Hump board with punched holes:

　　Bent camel hump:

　　During welding:

　　Plastic hump support after molding:

　　Dier Chemical Packing Co., Ltd. in Pingxiang City, Jiangxi Province has been engaged in research, development, and design of various tower internals products, as well as plastic, metal, ceramic bulk and regular packing materials for many years. We can produce various materials according to customer needs:

　　Our company (Jiangxi Pingxiang Dier Chemical Packing Co., Ltd.) is committed to providing customers with satisfaction and peace of mind; Our company has been signing long-term technical cooperation agreements with more than 10 domestic chemical research units for many years, and has hired senior technical management personnel from Tsinghua University and Tianjin to provide product design, processing, production, installation, and services.

　　Dier Chemical Packing is used to produce packing materials for petrochemical equipment and environmental protection equipment;

　　Plastic loose packing: Ball ring, stepped ring, saddle ring, conjugate ring, Rascal ring, flower wreath, polyhedral hollow ball, floating ball, plastic snowflake ringEnvironmental BallAlpha ring, Laru ring, three combinations of one filler, etc;

　　The above finished products are made of materials such as PP/PVC/CPVC/PVDF/PTFE/flame retardant materials, etc

　　Metal loose packing materials: Ball rings, stepped rings, saddle rings, conjugate rings, Raschig rings, Entrox rings, aluminum flower garlands, 84 inner arc rings, flat rings, double-layer conjugate rings, etc.

　　The above finished products are made of materials such as 304/304L/316/316L/duplex steel/urea grade stainless steel, etc

　　Ceramic bulk packing: Ball ring, stepped ring, saddle ring, conjugate ring, Rascal ring, cross partition ring, etc.

　　Regular packing: plastic/metal/ceramic orifice plate corrugated, perforated corrugated and wire mesh corrugated packing, etc.

　　Tower internals packing: trough distributor, trough distributor, tubular distributor, hump support, bubble cover tray, fog catcher, wire mesh demister, wavy wire mesh demister, grid packing, support, pressure grid, clamp, gasket, etc;

　　Dier Chemical Packing Co., Ltd. in Pingxiang City, Jiangxi Province can produce various products according to customer needs and provide a comprehensive system of design, production, and installation services; Please consult the sales department for details;

AfterSalesService :

• Plastic filling hump support