Metal wire mesh demister 304 wire mesh demister 316L wire mesh demister Dierta internals

Description :

　　Metal wire mesh demister 304 wire mesh demister 316L wire mesh demister Dierta internals

　　1、 Application purpose of wire mesh demister:

　　In the operation of gas-liquid mass transfer and heat transfer units such as distillation, absorption, analysis, and humidification, whether using packed towers or plate towers, the close contact and sharing of two phases are used to promote the transfer of the same components, achieving the purpose of liquid or gas purification, humidification, etc. In the gas phase leaving the packing layer or tray during these processes, a certain number and size of droplets or foam must be carried along. In subsequent cooling and refrigeration processes, tiny particles suspended in the gas phase will also be formed; When dealing with complex systems, gas-phase chemical reactions between components may also generate smaller particles.

　　2、 The function of the wire mesh demister:

　　When a gas with mist rises through a wire mesh at a certain speed, due to the inertia of the mist rising, the mist collides with the wire mesh filaments and adheres to the surface of the filaments. The diffusion of mist on the surface of the filament and the gravitational settling of the mist result in the formation of larger droplets that flow along the filament to the junction of the two filaments. The wettability of the filament, the surface tension of the liquid, and the capillary action of the filament cause the droplet to grow larger and larger until the accumulated droplet becomes so large that its own gravity exceeds the combined force of the gas lift force and the liquid surface tension, and then the droplet falls off the filament. After passing through the wire mesh demister, the gas is basically free of mist.

　　Titanium wire mesh demister:

　　3、 Product classification of wire mesh demister:

　　Metal wire mesh demister, plastic wire mesh demister, PP wire mesh demister, drawer type wire mesh demister, embedded wire mesh demister, top mounted wire mesh demister, bottom mounted wire mesh demister, etc.

　　316L wire mesh demister:

　　4、 Maintenance of wire mesh defogger:

　　The gas entering the titanium wire mesh demister contains impurity particles. If these substances accumulate on the surface of the wire mesh for a long time, it will cause blockage on the surface of the wire mesh, leading to liquid depletion and an increase in pressure drop index. Therefore, it is necessary to pay attention to its maintenance and cleaning work during use. The simple cleaning method for the titanium wire mesh demister is to clean it with water, dry it, or quickly dry it in its natural state, which can effectively extend the service life of the demister.

　　The product pictures of the above wire mesh demister are customized by customers in our company, including stainless steel wire (304, 304L, 316, 316L, etc.), PP (polypropylene), PTFE (polytetrafluoroethylene), nickel wire, titanium wire, copper wire, galvanized iron wire, etc; Cotton fiber, etc. Other materials can be customized according to user requirements. The diameter and height of the wire mesh are produced and processed according to customer requirements.

　　Our company (Jiangxi Pingxiang Dier Chemical Packing Co., Ltd.) has strong qualification capabilities; Technical services, design capabilities, fully automated production lines, and testing of each batch of new materials using spectrometers. After processing, the finished products are inspected as a whole and strictly tested according to standards. Each batch of finished products requires a pass rate of 99%. After leaving the warehouse, there is a legitimate transportation company and a reasonable transportation plan. The packaging form meets the actual requirements of customers and provides comprehensive services.

AfterSalesService :

• Wire mesh foam catcher