Stainless steel ball ring 316L ball ring packing DN50 ball ring

Description :

　　Stainless steel Ball Ring 316L Ball Ring Packing DN50 Ball Ring Dier Ball Ring Packing Factory

　　The Bao'er ring packing produced by Dier Chemical Packing Co., Ltd. in Pingxiang City, Jiangxi Province is a type of open hole ring packing with equal height and diameter. It is based on the Rascal ring packing and has window holes with inward extending tongue blades on the ring wall. Each layer of window holes has 5 or more tongue blades, and each tongue blade is bent inward towards the center of the ring. The positions of the upper and lower layers of window holes are opposite and staggered. Generally, the opening area accounts for about 30% of the total area of the ring wall.

　　Metal Ball Ring Filler:

　　PTFE Ball Ring Packing:

　　The gas-liquid distribution of the Bower ring is more uniform than that of the Rascal ring, and the contact area between the two phases increases, resulting in an increase in mass transfer efficiency. In addition, the Bauer ring maintains a constant mass transfer efficiency over a wide range of gas velocities.

　　Dier Chemical Packing is used to produce packing materials for petrochemical equipment and environmental protection equipment;

　　Plastic loose packing: Ball ring, stepped ring, saddle ring, conjugate ring, Rascal ring, flower wreath, polyhedral hollow ball, floating ball, plastic snowflake ring, environmentally friendly ball, alpha ring, Laru ring, three combination one packing, etc;

　　The above finished products are made of materials such as PP/PVC/CPVC/PVDF/PTFE/flame retardant materials, etc

　　Metal loose packing materials: Ball rings, stepped rings, saddle rings, conjugate rings, Raschig rings, Entrox rings, aluminum flower garlands, 84 inner arc rings, flat rings, double-layer conjugate rings, etc.

　　The above finished products are made of materials such as 304/304L/316/316L/duplex steel/urea grade stainless steel, etc

　　Ceramic bulk packing: Ball ring, stepped ring, saddle ring, conjugate ring, Rascal ring, cross partition ring, etc.

　　Regular packing: plastic/metal/ceramic orifice plate corrugated, perforated corrugated and wire mesh corrugated packing, etc.

　　Tower internals packing: trough distributor, trough distributor, tubular distributor, hump support, bubble cover tray, fog catcher, wire mesh demister, wavy wire mesh demister, grid packing, support, pressure grid, clamp, gasket, etc;

AfterSalesService :

• Stainless steel ball ring