The height of the metal wire mesh regular packing disk used in the distillation tower can be between 100-200

Description :

The height of the metal wire mesh regular packing disk used in the distillation tower can be between 100-200

1) Product Description:

　　The wire mesh corrugated packing produced by Dier Chemical Packing Co., Ltd. in Pingxiang City, Jiangxi Province is composed of wire mesh sheets arranged in a corrugated manner, with a corrugated sheet inclination angle of 30 degrees or 45 degrees; Adjacent corrugated sheets have opposite directions, and when filling inside the tower, the upper and lower packing plates are staggered and stacked at a 90 degree angle. It has the advantages of high efficiency, pressure reduction, and high flux. The products include BX and CY types, which are commonly used in vacuum distillation, atmospheric distillation, and absorption processes for difficult to separate and thermosensitive substances;

2) Product Performance Introduction:

　　The performance of the wire mesh corrugated packing produced by Dier Chemical Packing Co., Ltd. in Pingxiang City, Jiangxi Province mainly depends on the wetting degree of the packing surface and the uniform distribution of gas-liquid two-phase fluids;

　　3) Product Technical Parameters:

　　Polycrystalline silicon project wire mesh corrugated filler:

So what are the process factors that affect distillation operations?

　　1. Temperature of tower kettle:

　　Raising the temperature of the tower kettle reduces the components in the liquid phase inside the tower and increases the rising steam velocity, which is beneficial for improving mass transfer efficiency.

　　2. Operating pressure:

　　Increasing the operating pressure can correspondingly enhance the capacity of the tower. However, in the tower kettle non-volatile products, the content of volatile components increases. If the product is obtained from the top of the tower, it can improve the quality of the product and the concentration of volatile components.

　　3. Feed temperature:

　　Common feeds include floating point feed, cold liquid feed, saturated steam feed, gas-liquid mixture feed, and superheated steam feed.

　　4. Feeding amount:

　　Within the allowable load range, increasing the quantity of materials can increase product output. Exceeding the allowable load can result in entrainment and even flooding. If the feeding amount is too low, the balance operation is difficult to maintain, the steam velocity decreases, the tray is prone to leakage, and the distillation efficiency decreases.

　　5. Reflux ratio:

　　Increasing the reflux ratio can improve product quality. But if the reflux ratio is too high, the consumption will increase and the operating costs will rise. When the reflux ratio decreases, the quality of the product at the top of the tower is not qualified under mass transfer efficiency.

　　Dier Chemical Packing Co., Ltd. in Pingxiang City, Jiangxi Province, is a manufacturer of three major materials: metal packing, plastic packing, ceramic packing, and tower internals distributor. Our company has signed long-term technical cooperation agreements with more than 10 domestic chemical research units for many years and has hired senior technical management personnel from Tsinghua University and Tianjin to design, process, produce, install, and provide after-sales service for our products. Jiangxi Pingxiang Dier Chemical Packing Co., Ltd. has always been committed to the business philosophy of focusing on product quality and after-sales service, emphasizing long-term development, pursuing win-win cooperation, and ensuring satisfaction and peace of mind for all customers! If you have any questions, please contact our customer service staff so that we have the opportunity to become your business partner.

AfterSalesService :

• Metal wire mesh regular packing