280Y corrugated packing hydrogen peroxide project regular separation packing daily production of 30 cubic meters
280Y corrugated packing hydrogen peroxide project regular separation packing daily production of 30 cubic meters

280Y corrugated packing hydrogen peroxide project regular separation packing daily production of 30 cubic meters

Category:

chemical industry/Mass transfer equipment/Filler/Filler

Model:

280Y

Brand:

Dier Chemical Packing Co., Ltd., Pingxiang City, J

model:

280Y

type:

Corrugated packing

Loading method:

tidy up

Packing material:

metal

Retail Price

4,200.00USD


重量

kg

  • Product Description
  • model

    280Y

    type

    Corrugated packing

    Loading method

    tidy up

    Packing material

    metal

    Description :

      280Y corrugated packing, regular packing, separation packing

      The 280Y corrugated packing regular packing separation packing produced by our company is composed of several metal corrugated sheets arranged parallel and vertically with small holes on the corrugated sheets. The top angle of the corrugations is about 900 degrees, and the channels formed by the corrugations are at a 45 degree or 30 degree angle to the vertical direction. Adjacent corrugated flow channels are arranged at a 90 degree angle, and the upper and lower corrugated packing plates are stacked by rotating 90 degrees. In the tower with a smaller diameter connected by flanges, the corrugated packing plates are made into whole disks with a diameter slightly smaller than the inner diameter of the tower. In the tower with a larger diameter, each plate of corrugated packing is divided into several pieces and placed into the tower through a manhole. Inside the tower, they are assembled into complete disks. The corrugated sheets of the upper and lower plates of packing are rotated 90 degrees to install them, allowing the fluid to mix thoroughly inside the tower. The 280Y packing produced by our company is a regular packing used in the purification tower and drying tower of the Shuanyanshui project, which actually corresponds to the conventional 250 type corrugated plate packing.

      280Y productTechnical Specifications

      model

      

      Peak height mm

      

      specific surface area

      

      Theoretical plate number

      

      Void ratio%

      

      pressure drop

      

      F factor

      

      SM250

      

      twelve

      

      two hundred and fifty

      

      2-3

      

      ninety-seven

      

      1.5-2×10-4

      

      two point six

      

      In 2021, our company undertook the Ganzhou Shuangshui project and completed the installation of all fillers in July, which passed the customer's acceptance. The project is currently running normally. The customer has given positive feedback on our company's products and after-sales service. The following is the acceptance form:

      The main products of the company are

      Ceramic fillers/Tower internalsseriesCeramic tower internals series (liquid distributor, liquid collector, support beam); Ceramic regular packing series; Ceramic Bulk Packing Series; Acid resistant ceramic tiles, boards, and pipes; All ceramic ball arches and bar beams; Industrial ceramic balls, refractory balls; Filter material; Activated alumina; Molecular sieve; Foam ceramics; Honeycomb ceramics and other products.

      Plastic Bulk Landfill Filling SeriesBall ring, stepped ring, saddle ring, conjugate ring, Rascal ring, flower wreath, polyhedral hollow ball, floating ball, plastic snowflake ring, eco-friendly ball, alpha ring, Laru ring, three combinations and one filler, etc;

      The above finished products are made of materials such as PP/PVC/CPVC/PVDF/PTFE/flame retardant materials, etc

      Metal Bulk Packing Series:Ball ring, stepped ring, saddle ring, conjugate ring, Lassie ring, Entrox ring, aluminum flower wreath, 84 inner arc ring, flat ring, double-layer conjugate ring, etc.

      The above finished products are made of materials such as 304/304L/316/316L/duplex steel/urea grade stainless steel, etc

      Tower internals packing series:Tray distributor, trough distributor, tubular distributor, hump support, bubble cover tray, fog catcher, wire mesh demister, wavy wire mesh demister, grid packing, support, pressure grid, clamp, gasket, etc;

      Our company is committed to researching and developing high-performance chemical fillers, environmentally friendly fillers, ceramic products, and tower internals! The products produced are sold to coking chlor alkali, fertilizer, chemical, salt, pharmaceutical, refining, power, environmental protection, coking and other manufacturers across the country, with good performance and unanimous praise from customers! And it is exported to more than ten countries including Israel, France, the United States, South Korea, Germany, Brazil, Japan, etc. The product quality has been recognized and praised by many international chemical enterprises!

      our companyWe have always adhered to the business philosophy of focusing on product quality and after-sales service, emphasizing long-term development, pursuing win-win cooperation, and making all customers feel satisfied and at ease! We will sincerely and diligently cooperate with domestic and foreign business professionals, work hand in hand, and create a better future together.

    AfterSalesService :

    Key words:
    • 280Y corrugated packing