Large supply of 321 material Ball ring packing DN25 DN38 DN50 and other specifications

Description :

　　Pingxiang Deer321 Material Ball Ring Packing DN25 Ball Ring Packing Metal Ball Ring Packing

　　Metal bulk packing is widely used in packing towers in industries such as petrochemicals, fertilizers, and environmental protection. Stainless steel Ball ring packing is suitable for various separation, absorption, desorption devices, atmospheric and vacuum distillation devices, synthetic decarbonization, desulfurization systems, ethylbenzene separation, separation, etc. Such as humidifiers, sulfur recovery, ammonia storage, phenol recovery, and atmospheric absorption towers used in coal to urea projects; Sulfur recovery, transformation, tail gas absorption tower, alkali washing tower and other equipment for coal to K alcohol project; Washing tower in environmental wastewater treatment plant; In the air separation system.

　　productTechnical Specifications：

　　The standard for stainless steel ball ring packing is HG/T21556.2-95, which has the advantages of high temperature resistance, good processing performance, light weight, good toughness, high mass transfer efficiency, and good compressive strength. However, its corrosion resistance is different from that of plastic and ceramic packing. Therefore, the specific selection needs to be screened based on the above conditions. According to incomplete statistics of "100 second special steel", the materials for metal ball ring fillers include carbon steel, ordinary stainless steel, duplex steel, urea steel, 20 alloy, corrosion-resistant Monel 400, 321 material, Hastelloy C276, 825 alloy, etc.

　　Our company's metal bulk packing workshop is currently producing DN25 Ball ring packing made of 321 material. This packing was ordered by a customer in Zhejiang from our company, with a quantity of 80 cubic meters. In order to meet the customer's requirements, our company is working overtime in production and manufacturing. Below, the editor will introduce the installation precautions and methods of metal bulk packing:

　　Precautions for installation of metal fillers:

　　1、 The safety of the lifting device during the filling process of bulk packing:

　　1. All construction personnel entering the tower must wear safety helmets, while personnel outside the tower and on the ground must wear safety helmets. Personnel on the tower must wear safety belts;

　　2. The safety devices such as the switch and overload alarm display of the elevator must be kept intact, and a no-load inspection must be carried out before daily use. Only when they are normal can they be used to prevent any accidents that may be caused by electrical failures;

　　3. During the lifting process, it is strictly prohibited to stand within the radius of the basket to avoid accidents.

　　2、 When installing loose packing materials, attention should be paid to safety and fire prevention:

　　1. Entering the construction site, smoking and fireworks are strictly prohibited;

　　2. During the installation of fillers, welding is not allowed;

　　3、 Installation method of loose packing material:

　　1. Install the packing according to the tower equipment diagram and ensure that the installation height and quantity of the packing are correct;

　　2. Put 10 meters of tap water into the tower to buffer the force of the filling material falling into the lower part of the tower.

　　3. The filling material is naturally stacked into the tower;

　　4. When filling, it should always be poured from a certain height away from the filling layer. People should not stand directly on the filling material to prevent deformation and uneven density. Wooden boards should be laid on the filling material to disperse the force;

　　5. After the installation of each section of filling material, check whether the upper filling material is flat. If there is any unevenness, use wooden strips to naturally push it flat;

　　6. During the packing process, it is not allowed to leave other debris, packaging bags, etc. inside the tower together with the packing.

AfterSalesService :

• Ball ring packing