Dier long-term supply of titanium wire mesh corrugated packing 316L 304 TA2 customized production

Description :

　　Deere brand wire mesh corrugated packing 316L wire mesh corrugated packing 304 wire mesh corrugated packing

　　Stainless steel wire mesh corrugated packing is assembled by arranging stainless steel wire mesh corrugated sheets, with an inclination angle of 30 ° or 45 °. Adjacent corrugated sheets have opposite directions. When filling inside the tower, the upper and lower plates of packing are staggered by 90 ° and stacked. The products include 250Y, BX500, CY700, and DZ1000, which are important milestones in the development of structured packing. The packing forms a uniform geometric arrangement inside the tower, specifies the gas-liquid flow path, improves the phenomenon of channel flow and wall flow, and has the advantages of low resistance, high flux, and high diversion efficiency.

　　3)productTechnical Specifications：

　　 Dier Chemical Packing Co., Ltd., Pingxiang City, Jiangxi Provinceproductionmetalwire meshCorrugated packingMainly used in distillation systems, methanol and other equipment. Most domestic co distillation manufacturers use the double tower distillation process, with almost all main and pre distillation towers using plate structures. Although the investment is low, the tower height, low operational flexibility, and complex structure make installation and maintenance very difficult; High energy consumption increases the consumption of crude methanol, water, electricity, steam, etc. in actual production, which greatly weakens the competitiveness of products. Moreover, there are many control points, complicated operations, delayed reaction of process indicators, long adjustment time, and unstable product quality After careful consideration, a double tower distillation process has been developed, but the core equipment is a new type of packed distillation tower with both the main and pre towers. The high-efficiency stainless steel wire mesh corrugated packing is used as the packing inside the tower, which has the advantages of large specific surface area, strong liquid distribution ability, low tower resistance, high mass and heat transfer efficiency, large operational flexibility, and easy installation and maintenance And it can reduce the height of the main and pre towers by one-third Therefore, in actual production, the product has good quality, low consumption, easy operation, fast adjustment of process indicators, and at the same time, the product also has strong competitiveness

　　Our company can also process wire mesh corrugated packing that is not very demanding according to customer requirements. Today, we want to share with you that our company's regular packing workshop is processing a wire mesh corrugated packing with an added orifice plate corrugated packing in the middle. This packing is a product that has been approved by the customer and calculated by our company's designers according to customer requirements. Please refer to the product image for details:

　　For many years, Dier Chemical Packing Co., Ltd. in Pingxiang City, Jiangxi Province has been engaged in research, development, and design of various tower internals products, as well as plastic, metal, ceramic bulk and regular packing materials. We can produce various materials according to customer needs, and our company's mission is to satisfy and reassure customers; Our company has been signing long-term technical cooperation agreements with more than 10 domestic chemical research units for many years, and has hired senior technical management personnel from Tsinghua University and Tianjin to provide product design, processing, production, installation, and services.

AfterSalesService :

• Wire mesh corrugated packing