Plastic PP inclined tube packing, stainless steel honeycomb packing, Dier long-term supply

Description :

　　Plastic PP inclined tube packing, stainless steel honeycomb inclined tube packing, manufacturer Pingxiang Dier

　　One Product Description:

　　Our company (Dier Chemical Packing Co., Ltd., Pingxiang City, Jiangxi Province) produces hexagonal honeycomb packing in two forms: inclined tube and straight tube. The inclined pipe is mainly used for various sedimentation and sand removal purposes, and has been widely and maturely used as a water treatment device in water supply and drainage engineering for more than ten years. It has the advantages of wide applicability, high treatment efficiency, and small footprint. It is suitable for sand removal at water inlets, sedimentation, oil separation, and tailings concentration treatment in general industrial and domestic water supply. It is suitable for both new construction projects and the renovation of existing old ponds, and can achieve good economic benefits.

　　II Product Features

　　1. The wet area is large and the hydraulic radius is small.

　　2. The laminar flow state is good, and the particle settling is not affected by turbulent flow interference.

　　When the length of the inclined pipe is 1 meter, the effective load is designed at 3-5 tons/m3 · hour. V is controlled within the range of 2.5-3.0 millimeters per second, resulting in excellent effluent quality.

　　4. When using honeycomb inclined pipes at the water intake with a length of 2.0-3.0 meters, they can safely operate and treat high turbidity with a mud and sand content of 50-100 kg/m3.

　　5. Adopting inclined tube sedimentation tank, its processing capacity is 3-5 times that of horizontal flow sedimentation tank, and 2-3 times that of accelerated clarification tank and pulse clarification tank.

　　Straight pipes are mainly used as microbial carriers for high load biofilters, tower biofilters, submerged biofilters (also known as contact oxidation tanks), and biofilters for the biochemical treatment of industrial organic wastewater and urban sewage.

　　How to install and debug hexagonal honeycomb packing and inclined tube packing?

　　1. Installation of sediment discharge pipe at the bottom of sedimentation tank

　　The installation sequence of inclined sedimentation tanks generally starts from the bottom, and the installation of the bottom sludge discharge pipeline system is completed first to ensure that the sludge discharge pipeline openings meet the design requirements, are firmly fixed, and checked for accuracy before entering the next installation process.

　　2. Complete the installation of the packing bracket

　　According to the installation construction drawing of the inclined tube sedimentation tank packing support, first install the packing support in place, check that all welding nodes are secure, that the support strength is sufficient to withstand the weight of the packing, and complete anti-corrosion treatment on the surface of the support.

　　3. Complete the hot welding of inclined pipe packing

　　According to the hot stamping method of the inclined tube packing, each inclined tube packing is packaged as a separate hot stamping unit, with one unit measuring 1 square meter after hot stamping. After hot stamping is completed, it is neatly stacked on the site (with a small amount of loose pieces reserved for future use).

　　4. Assembly inside the inclined tube packing pool

　　Assemble the hot pressed packing unit from left to right on the upper part of the packing bracket. Always maintain a constant angle of 60 °, and when assembling each unit in sequence, it should be appropriately compressed. If the size is not exactly suitable when assembling to the right, it is necessary to use loose sheet inclined tube filling to heat weld according to the size before assembling until it is fully in place.

　　5. Fixing the upper part of the inclined pipe packing

　　Due to the fact that the specific gravity of the inclined pipe packing is 0.92, which is slightly lower than that of water, after the inclined pipe packing is assembled in the tank, a 10mm round steel needs to be pulled from left to right above the packing for reinforcement (two round steel are required to pass through the upper part of each unit packing). The two ends of the round steel are reliably fixed on the sedimentation tank wall. After installing the round steel, it can effectively prevent the possible loosening and floating phenomenon of the inclined pipe packing during initial use. The round steel is anti-corrosion with epoxy coal tar.

　　6. Operation and commissioning of inclined tube sedimentation tank

　　(1) Check if the inflow is uniform and not cause any impact on the sedimentation tank, which may affect the sedimentation effect.

　　(2) Adjust the height and levelness of the water outlet weir to be appropriate, and maintain uniform water discharge.

　　(3) After the above construction procedures, the installation of the filling material for the inclined pipe sedimentation tank has been completed. After normal use, it is necessary to determine the sludge discharge cycle based on the concentration of suspended solids in the inflow, pay attention to timely sludge discharge, and ensure that the inclined tube sedimentation tank always maintains good operating conditions and water quality.

　　Dier Chemical Packing Co., Ltd. in Pingxiang City, Jiangxi Province, is a manufacturer of three major materials: metal packing, plastic packing, ceramic packing, and tower internals distributor. Our company has signed long-term technical cooperation agreements with more than 10 domestic chemical research units for many years and has hired senior technical management personnel from Tsinghua University and Tianjin to design, process, produce, install, and provide services for our products.

AfterSalesService :

• inclined tube packing