Dier supplies a large amount of high porosity 125Y corrugated packing, with a theoretical plate number of 1-1.2

Description :

　　Dier supplies a large amount of high porosity 125Y corrugated packing, with a theoretical plate number of 1-1.2

Metal plate corrugated packingIt is a universal structured packing material with characteristics such as high flux, pressure reduction, and high separation efficiency. Compared with other structured packing materials, it has good plugging performance. Significant achievements have been made in industrial applications such as petrochemicals, fertilizer industry, purification, and smelting. due toMetal plate corrugated packingIt has a neat geometric structure and regular arrangement, which defines the gas-liquid flow path and sends out the phenomenon of channel wall flow. The pressure drop is very small, the anti blocking performance is good, but it can also provide a larger specific surface area. Compared with bulk packing, at the same specific surface area,metalPlate corrugated packingThe porosity is higher, with a larger flux, and the comprehensive processing capacity is much larger than that of plate towers and bulk packed towers.

125 type productTechnical Specifications：

　　The installation of tower equipment is an important step, especially for the installation requirements of corrugated packing towers. If the installation deviation causes the tower body to tilt or the packing to be uneven, it directly affects the contact between gas and liquid in the tower under operating conditions, and affects the efficiency of the tower plate. To ensure tower efficiency, the following issues should be noted during tower installation.

　　1. The installation requirements of the tower body are that the key to the installation of the tower body is the alignment and leveling of the tower. During alignment and leveling, it should be carried out in two or more directions that are perpendicular to each other in the same plane. After aligning and leveling the tower body, the allowable deviation should comply with the regulations.

　　2. Technical requirements for packing installation: When installing packing, the following requirements should be considered:

　　A: The installation of fillers and supporting structures should be balanced and firm, and the channels of the supporting structures should meet the design requirements. The holes should not be blocked.

　　B: The levelness of the packing support plate after installation should be less than 2/1000 and not greater than 4mm.

　　C: When installing the wire mesh corrugated packing, the angle between the ripple direction of the wire mesh corrugated sheet specified in the design and the tower axis should be checked to be 30 degrees or 45 degrees, with a permissible deviation of plus or minus 2 degrees.

　　D: The ripple direction of the next layer of packing should be perpendicular to the supporting grid plate, and the ripple directions of adjacent packing disks should form a 90 degree angle with each other during assembly.

　　E: When filling the corrugated packing in blocks, it should be loaded from the manhole. Each layer should be filled on both sides of the tower wall first, and then gradually filled towards the middle of the tower. Each block should be fixed with a clamp and compressed during filling.

　　F: There should be no gap between the packing tray and the tower wall, and the liquid flow guiding device on the tower wall should be intact.

　　G: The quality and volume of corrugated packing should meet the design requirements.

　　I: The levelness of the packing installation should meet the requirements.

　　Our company (Jiangxi Pingxiang Dier Chemical Packing Co., Ltd.) has strong qualification capabilities; Technical services, design capabilities, fully automated production lines, testing of each batch of new materials using spectrometers, overall quality inspection of finished products after processing, and strict testing according to standards. Each batch of finished products is required to have a pass rate of 99%. After leaving the warehouse, there is a legitimate transportation company and a reasonable transportation plan. The packaging form meets the actual requirements of customers, and there is a comprehensive after-sales service.

　　Dier Chemical Packing Co., Ltd. was established in 2004 in Pingxiang City, Jiangxi Province. It is a key centralized enterprise for the production of chemical packing materials under the former Ministry of Chemical Industry. It is a member of the National Chemical (Technology, Information) Center Station, a member of the China Petroleum and Chemical Survey and Design Association, and a network cooperative enterprise of central enterprises such as PetroChina, Sinopec, ChemChina, and CNNC The company launched the second phase of the new environmentally friendly packing and tower internals equipment project in July 2017, located in the New Third Board Industrial Park of the development zone. It covers an area of 45 acres, with a total investment of 100 million yuan, a registered capital of 98 million yuan, fixed assets of 50 million yuan, and more than 200 employees, including 26 middle and senior technical personnel.

　　We produce 18 series and over 100 types of products including metal, ceramic, plastic fillers, tower internals, and chemical equipment. We have also hired four chemical tower design PhDs from Tsinghua University, Tianjin University, South China University of Technology, and Zhejiang University of Technology to provide strong technical support for the company's product quality, tower internals design, production, and new product development. There are more than 20 independently invented patents, which meet the needs of serving chemical and environmental protection enterprises. They produce a series of tower internals and chemical packing products, which are sold to coking and chlor alkali, fertilizer, chemical, salt, pharmaceutical, refining, power, environmental protection, coking and other manufacturers across the country with good usage effects. In 2008, they obtained the self operated import and export rights for foreign trade, and their products are exported to more than ten countries including Israel, France, the United States, South Korea, Germany, Brazil, Japan, etc.

AfterSalesService :

• Plate corrugated packing