Deere customized production of distillation tower wire mesh corrugated packing BX500 700 type, large quantity is preferred

Description :

　　Customized production of CY wire mesh corrugated packing BX metal wire mesh packing Distillation tower packing

　　The wire mesh corrugated packing produced by Dier Chemical Packing Co., Ltd. in Pingxiang City, Jiangxi Province is composed of wire mesh sheets arranged in a corrugated manner, with a corrugated sheet inclination angle of 30 degrees or 45 degrees; Adjacent corrugated sheets have opposite directions, and when filling inside the tower, the upper and lower packing plates are staggered and stacked at a 90 degree angle. It has the advantages of high efficiency, pressure reduction, and high flux. The products include BX and CY types, which are commonly used in vacuum distillation, atmospheric distillation, and absorption processes for difficult to separate and thermosensitive substances;

　　Stainless steel wire mesh corrugated product features:

　　① High specific surface area, high porosity, and light weight.

　　The specific surface area of stainless steel wire mesh filler and metal wire mesh corrugated filler is equivalent to 4.5 times that of a 50mm metal ball ring. The ball ring surface area is 120, and the porosity is high. The wire mesh also has strong capillary action, making it excellent in wetting performance. The wet porosity is almost equal to the dry porosity; The stainless steel wire mesh corrugated sheet has small openings with small holes, which enhances the uniform distribution of liquid and reduces dead corners in the packing, especially in small towers, improving separation efficiency. Wire mesh and mesh size: For wire mesh corrugated fillers, China usually uses wire diameters of 0.12 or 0.15mm for stainless steel wires. The higher the mesh size of the wire mesh, the easier it is for the liquid to form a film. It is usually recommended to use a 60 mesh wire mesh, and for larger wire diameters, 40-50 mesh wire materials can also be used.

　　② The inclination angle of the steam passage is small, and the resistance along the way is low;

　　③ The surface of the filler is uniformly wetted, and even with a spray density of 0.2m hours, it can achieve complete wetting, resulting in high filler efficiency;

　　④ Good radial diffusion and sufficient gas-liquid contact.

　　⑤ The pressure loss caused by steam expansion and contraction is small.

　　The wire mesh corrugated packing produced by Dier Chemical in Pingxiang City is highly popular among customers. The size of the packing can be made according to customer requirements. Generally, those with a diameter less than 800mm are made in whole discs, while those with a diameter greater than 800mm are made in blocks according to customer requirements. The following are the wire mesh corrugated fillers produced by our company according to customer requirements.

　　Dier Chemical Packing Co., Ltd. in Pingxiang City, Jiangxi Province has been engaged in research, development, and design of various tower internals products, as well as plastic, metal, ceramic bulk and regular packing materials for many years. We can produce various materials according to customer needs:

　　Our company (Jiangxi Pingxiang Dier Chemical Packing Co., Ltd.) is committed to providing customers with satisfaction and peace of mind; Our company has been signing long-term technical cooperation agreements with more than 10 domestic chemical research units for many years, and has hired senior technical management personnel from Tsinghua University and Tianjin to provide product design, processing and production, installation, and after-sales service.

AfterSalesService :

• Wire mesh corrugated packing