Design and produce plastic trough distributor FRPP trough liquid distributor tower internals

Description :

　　Plastic trough distributor FRPP trough liquid distributor tower internals manufacturer

　　The function of distributor:

　　Distributor is a device that evenly distributes or redistributes liquid at the top or a certain height of the packing material Used to improve the effective surface for mass and heat transfer, enhance interfacial contact, and thus improve the efficiency of the tower. Experimental results have shown that the flow of liquid within the packing layer is not uniform plug flow, but rather exhibits phenomena such as channel flow, bias flow, and wall flow This will cause amplification and end effects in the packed tower. Reasonable design and selection of liquid initial distributors and redistributors aim to reduce and prevent amplification effects in the packed tower, thereby reducing tower height and diameter Reduce costs or operational expenses.

　　Our company produces a wide variety of distributors

　　There are various types of liquid distributors with different structures, which can be divided into several categories according to different methods:

　　According to their usage, they can be divided into universal and special universal types. The former refers to having conventional operational flexibility, spray density, gas velocity range, and is suitable for general fluids; The latter includes situations such as high elasticity, large or small spray density, high gas velocity, and special materials.

　　According to the driving force of liquid flow, it can be divided into pressure type and gravity type.

　　According to the method of liquid outflow, there are mainly orifice flow and weir flow, as well as capillary flow, thin film flow on the guide plate, etc.

　　According to the structural shape, common types include tubular, groove, disc, and combination.

　　Our company produces distributors such as stainless steel 304 316L carbon steel 2205 2507, plastic materials such as PP FRPP, and ceramic distributors.

　　Below, I would like to share with you a set of FRPP distributors with a diameter of 3500mm ordered by a customer in Jiangsu from our company. Our company designed and produced them according to the customer's requirements and provided relevant data such as flow rate. After completion, they were assembled and inspected by quality department personnel before waiting for shipment.

　　Our company (Jiangxi Pingxiang Dier Chemical Packing Co., Ltd.) is committed to providing customers with satisfaction and peace of mind; Our company has been signing long-term technical cooperation agreements with more than 10 domestic chemical research units for many years, and has hired senior technical management personnel from Tsinghua University and Tianjin to provide product design, processing, production, installation, and services.

　　Dier Chemical Packing is used to produce packing materials for petrochemical equipment and environmental protection equipment;

　　Plastic loose packing: Ball ring, stepped ring, saddle ring, conjugate ring, Rascal ring, flower wreath, polyhedral hollow ball, floating ball, plastic snowflake ring, environmentally friendly ball, alpha ring, Laru ring, three combination one packing, etc;

　　The above finished products are made of materials such as PP/PVC/CPVC/PVDF/PTFE/flame retardant materials, etc

　　Metal loose packing materials: Ball rings, stepped rings, saddle rings, conjugate rings, Raschig rings, Entrox rings, aluminum flower garlands, 84 inner arc rings, flat rings, double-layer conjugate rings, etc.

　　The above finished products are made of materials such as 304/304L/316/316L/duplex steel/urea grade stainless steel, etc

　　Ceramic bulk packing: Ball ring, stepped ring, saddle ring, conjugate ring, Rascal ring, cross partition ring, etc.

　　Regular packing: plastic/metal/ceramic orifice plate corrugated, perforated corrugated and wire mesh corrugated packing, etc.

　　Tower internals packing: trough distributor, trough distributor, tubular distributor, hump support, bubble cover tray, fog catcher, wire mesh demister, wavy wire mesh demister, grid packing, support, pressure grid, clamp, gasket, etc;

　　Dier Chemical Packing Co., Ltd. in Pingxiang City, Jiangxi Province can produce various products according to customer needs and provide a comprehensive system of design, production, and installation services; Please consult the sales department for details;

AfterSalesService :

• Plastic trough distributor