High frequency welded finned tube radiator with seamless steel tube finned tube radiator in Jiaao workshop

Description :

　　High frequency welded finned tube radiator with seamless steel tube finned tube radiator in Jiaao workshop

　　Fin tubes are made by high-frequency welding technology with flake shaped fins, so do not collide or squeeze them during installation and use, as this can easily deform and even affect the heat dissipation effect. Due to the spiral distribution of finned tube scales, there may be some sediment and water rust layers during long-term use. We need to clean and sweep them in a timely manner. Check if the interface of the finned tube is loose and if the foot pad has fallen off. The exposed area of the finned tube should be kept dry to prevent rainwater from falling, and should not be too close to the ground to avoid corrosion of the finned tube caused by irrigation inside the greenhouse.

　　Whether in terms of product quality (high welding rate of fins, up to 95%), production rate, or automation level, high-frequency welded spiral finned tubes are one of the widely used spiral finned tubes. They are now widely used in industries such as power, metallurgy, cement waste heat recovery, and petrochemicals.

　　As a heat exchange element, finned tubes work in high-temperature flue gas conditions for a long time, just like finned tubes used in boiler heat exchangers in harsh environments. The effect is still acceptable, but in long-term application, the physical effects of cold expansion and contraction can cause the detachment and loosening of fins and base tubes, thereby affecting the operation of the entire industrial steam radiator.

AfterSalesService :

• Workshop high-frequency welded finned tube radiator