Jia'ao Steel High Frequency Welded Fin Tube Radiators for Aquaculture Fin Tube Radiators

Description :

　　Jia'ao Steel High Frequency Welded Fin Tube Radiators for Aquaculture Fin Tube Radiators

　　A finned tube radiator with the same heat transfer capacity can significantly reduce equipment volume and reduce metal consumption. It has been developed to ensure that the finned tube, its cost-effectiveness, and heat transfer efficiency are comprehensively free from defects such as cracks, pores, incomplete welding, and burn through; The number of times to tens of times that of a light tube can enhance heat transfer and reduce flow resistance. Welded finned tubes use high-frequency current and are welded while being wound, so the base tube and fins are basically integrated. Welding rate is an important indicator for evaluating the quality of finned tubes.

　　The finned tubes produced by our factory are mainly suitable for heating large areas of greenhouses, factories, and animal husbandry. The surface has been hot-dip galvanized to eliminate thermal resistance and increase anti-corrosion ability. The smooth surface reduces water flow resistance and has a service life of 8-12 years.

　　The high-frequency resistance welding spiral finned tube mainly introduces high-power high-frequency current into the welded part during operation. During operation, it mainly uses the resistance heat generated by the current passing through the contact surface and adjacent areas of the welded part joint to make the welding contact surface reach a melted or semi melted plastic state, and then applies appropriate pressure to the welding contact surface to complete the welding work of the finned tube.

AfterSalesService :

• Steel high-frequency welded finned tube radiator