Jiaao DN20 high-frequency welded finned tube radiator cold wound finned radiator

Description :

　　Jiaao DN20 high-frequency welded finned tube radiator cold wound finned radiator

　　Steel radiators are currently a popular type of radiator in the market. These radiators are made of cold-rolled low-carbon steel and have undergone anti-corrosion treatment internally. The surface is coated with high-temperature electrostatic powder, and their service life is generally over 5 years.

　　Fin tube heat exchangers use hot air, steam, or water to exchange heat with solids through plates. The roof type distribution board is installed at the bottom of the main body. The middle distance of the distribution board is 400-500 millimeters, and the length of the distribution board is 300-400 millimeters. By adjusting the frequency of the vibration motor, the residence time of the material in the equipment can be controlled, allowing the material to undergo heat exchange at a predetermined temperature.

　　The primary characteristic of high-frequency welded finned tubes is that, due to the fast welding speed, the product has a strong self cooling effect. Not only does it have a small heat affected zone, but it is also not easily oxidized. Therefore, the arrangement and function of the weld seam are excellent. Secondly, it has excellent anti-corrosion and wear-resistant properties, as well as high stability. In addition, the heat transfer of high-frequency welded finned tubes. High frequency welded finned tube radiator has no vacancy thermal resistance and high heat transfer coefficient. The external device is sprayed with plastic, which not only adds decoration but also increases the heat transfer coefficient. High frequency welded finned tube welding has no vacancy thermal resistance and high heat transfer coefficient.

AfterSalesService :

• Cold wound finned radiator