Liquid water-soluble fertilizer production line manufacturer Small bottle filling large amount of element liquid fertilizer equipment Anhui Xinyuan

Description :

　　Product characteristics of liquid water-soluble fertilizer equipment

　　1. The original solution is filtered through a filter to remove impurities.

　　2. Automatic batching system to meet customer needs

　　3. Reaction kettle reaction, heating, cooling and stirring various raw materials through the reaction kettle. Form a liquid water-soluble fertilizer.

　　4. Emulsify the liquid in the reaction kettle to achieve uniform liquid without particles or precipitation

　　5. Then put the liquid into the liquid storage tank.

　　6. There are large barrel filling and small bottle filling production lines for filling.

　　7. Automatic packing line

　　8. Automatic palletizing line

　　Small bottle filling production line

　　Large barrel filling production line

　　Large bucket robot palletizing system

　　Anhui Xinyuan, as a domestic fertilizer production equipment brand, has continuously carried out technological innovation. In recent years, it has provided complete sets of production line equipment for water-soluble fertilizers, blended fertilizers, and new fertilizers to domestic fertilizer industry enterprises such as Chuanhua Group, Jinzhengda, Stanley, Shikefeng, Sinochem Fertilizer, Migao Group, Wengfu Group, Huilong Group, Guizhou Kailin, Jilin Wantong, Shenyang Four Brothers, Hubei Xiangyun, Haida Biotechnology, Hebei Mengbang, Liaoning Jinda, Jiangxi Xianyinong, and Liaoning Yimushen. We have achieved fully automated and intelligent production of fertilizer ingredients, mixing, packaging, boxing, and palletizing, solving a series of technical problems that have long plagued the fertilizer industry (including clogging, moisture absorption, dust, viscosity, corrosiveness, etc.), greatly promoting the technological development of the industry.

　　Equipment Instructions

　　Anhui Xinyuan has launched a complete set of production equipment for liquid fertilizers since 2013, including processes such as automatic metering and batching, mixing and blending, sedimentation and filtration, and quantitative filling. In 2014, Xinyuan launched an environmental protection project to turn waste into treasure, turning biogas slurry into fertilizer and solving the problem of biogas slurry pollution.

　　The microbial fermentation process is mainly divided into 5 steps. 1. Liquid storage: After pre-treatment, the biogas slurry is sent to the raw material tank, and after storage, it is sent to the fermentation tank; 2. Inoculate fermentation, the biogas slurry enters the fermentation tank, inoculates specific beneficial organisms, and is thoroughly stirred and mixed. After the liquid stays in the fermentation tank, it is sent to the ingredient tank; 3. Nutrient ingredients need to be added to the biogas slurry according to strict process procedures to ensure that the quality of fertilizers meets national standards; 4. Store the liquid, add nutrients to the liquid and send it to the finished product tank. After storage, send it to the packaging tank; 5. Packaging, automatic filling of finished liquid fertilizers.

　　Main technical parameters

　　1. User interface: DN65 material inlet pressure<0.6Mpa;

　　2. Outer diameter of canning head: ф 40mm;

　　3. Applicable bottleneck: Small 140 * 200 * 320mm; 260 * 290 * 500mm;

　　4. Filling range: 5-30kg;

　　5. Measurement accuracy: ± 0.2% (note: filling accuracy depends on the viscosity of the material and the continuity and stability of material supply);

　　6. Packing speed: ≤ 250 barrels per hour (5kg);

　　7. Gas source pressure: 0.6-0.7 megapascals;

　　8. Gas consumption: 120L/min;

　　9. Power supply:~380 volts, 30 hertz

　　10. Total power: 1.6KW

　　11. Weight: approximately 1000kg;

　　12. Dimensions: 8700 * 1350 * 230mm (length * width * height)

AfterSalesService :

• Manufacturer of liquid water-soluble fertilizer production line