Manufacturer of urea crusher equipment
Category:
packing/Packaging and forming machinery/Food and Drug Packaging Machine
Model:
five hundred and twenty
Brand:
Xinyuan
Retail Price
238,000.00USD
重量
kg
- Product Description
-
Description :
The stainless steel fertilizer urea crusher is mainly used for fine crushing operations. This machine can crush food, chemical products, etc., and is suitable for materials with high hardness. It has a simple and compact structure, occupies a small area, is easy to maintain, has good crushing effect, runs smoothly, and is easy to clean.
The stainless steel fertilizer urea crusher utilizes the relative operation between the movable toothed disc and the fixed toothed disc, allowing the crushed material to be crushed through the impact, friction, and collision between the toothed discs. The crushed material can be directly discharged from the grinding chamber and discharged through the discharge port. After being crushed, the material is collected in a bag, and the crushed material is collected in the bag. Air comes out from the small holes of the bag. The thickness can be adjusted by changing the mesh size to different mesh sizes.
main purpose
This device is mainly used for crushing granular urea and can also be used for crushing other single fertilizers. Widely used in high nitrogen production, flushing fertilizer production, and water-soluble fertilizer production in compound fertilizer factories; Also applicable to feed production.
structural characteristics
The two rolling rolls rotate in opposite directions, squeezing and crushing the material with fast crushing speed, non stick rollers, simple and reliable operation, no vulnerable parts, no dust, and no need for auxiliary dust removal equipment. The feed inlet is equipped with a broken block toothed roller, which will not block even if there is a small amount of agglomeration, and can work continuously. This device can be made into fixed and mobile according to customer requirements.
Technical Specifications
model SG600 SG800 SG1000 production capacity 2-3t/h 3-5t/h 5-8t/h Feed particle size ≤ 5mm ≤ 5mm ≤ 5mm discharge particle size ≤ 0.2-0.5mm ≤ 0.2-0.5mm ≤ 0.2-0.5mm speed 800-1000r/min 800-1000r/min 800-1000r/min diameter Ф270mm Ф270mm Ф270mm Motor power 11kw 15kw 22kw Structure and working principle
The main components of the machine include: spindle, roller, concave plate, housing, frame support device, adjustment mechanism, feeding hopper, transmission part, etc.
working principle
The machine mainly uses the grinding and shearing of the gap between the high-speed running drum and the concave plate. The size of the gap determines the degree of material crushing. The drum speed and diameter can be adjusted. After urea enters the machine body, it hits the body wall and baffle and is crushed. Then, it is ground into powder through the rack between the drum and the concave plate. The gap between the concave plates is adjusted by the adjustment mechanism within the range of 3-12 millimeters to adjust the degree of crushing, and the feeding port adjustment mechanism can control the production volume.
The daily cleaning and operation steps of stainless steel crusher are as follows:
1. After production is completed, turn off the power and deliver the materials in production to the intermediate station according to the material entry and exit procedures.
2. Hang the equipment to be cleaned status sign.
3. Open the crusher and move the collection bag, sieve, detachable air duct, etc. into the cleaning room sink.
4. Inject about 2/3 volume of 30-40 ℃ warm water into the sink, soak for 10-30 minutes, and then wash the powder bag repeatedly with running water until it is clean; Wash the sieve and air duct with a soft bristled brush to make the water clear. Rinse three times with ionized water. Dry in a clean area of the same level as the crushing room and set aside for later use.
5. Use a clean cloth dipped in warm water to repeatedly wipe the material inlet, inner chamber, material outlet, and powder collection room of the crusher until they are clean.
6. Use deionized water to wipe and clean the inner wall of the crusher, powder conveying pipe, and cyclone separator.
7. Use a clean dry towel to dry the above parts.
8. Wipe the floor of the operation room, distribution cabinet, motor, and operation cabinet clean.
9. After the cloth bag and sieve are dried, install all parts of the crusher in the reverse order of disassembly.
10. Clean and flush the floor of the operation room until there is no dust or water accumulation on the ground.
11. Fill in the clearance record.
AfterSalesService :
Key words:- Manufacturer of urea crusher equipment
