HWY-2 Constant Temperature Water Bath Constant Temperature Water Bath Pot Constant Temperature Water Bath

Description :

　　HWY-2 Constant Temperature Water Bath Product Introduction

　　HWY-2 constant temperature water bath is a laboratory instrument designed and manufactured specifically for various related factories, enterprises, construction units, research institutes, colleges and universities. This instrument uses a new type of refrigeration compressor unit, which has good refrigeration effect and low noise, and is highly welcomed by laboratory staff in various units. The product design features large volume and high temperature control accuracy, making it particularly suitable for use in various laboratories in highway engineering construction.

　　1、 Main technical features of HWY-2 constant temperature water bath

　　1. Adopting stainless steel sink, stainless steel workbench, and spray painted box, it has strong corrosion resistance and durability.

　　2. Using a liquid crystal display temperature controller and a circulation pump to circulate the water bath solution, the circulation is sufficient, the temperature inside the bath is uniform, and the temperature control accuracy is high.

　　3. This instrument has two working modes: (1) self circulation cold bath working mode, used for temperature control and insulation of various asphalt samples; ⑵ External closed-loop system working mode, capable of temperature control and insulation for each closed-loop system (can be used in conjunction with the company's low-temperature needle penetration dedicated bathtub).

　　4. Large volume, reasonable design, and simple operation.

　　2、 Main technical parameters and indicators of HWY-2 constant temperature water bath

　　1. Working power supply: AC (220 ± 10%) V, 50Hz

　　2. Water bath capacity: 330mm x 390mm x 300mm (length x width x depth)

　　3. Applicable water volume: 32L

　　4. Heating device: electric heater, power 1500W

　　5. Refrigeration method: Compressor refrigeration

　　6. Temperature control range: -10 ℃ to 70 ℃

　　7. Temperature control accuracy: can be set to -10 ℃, 25 ℃, 60 ℃, with an accuracy of ± 0.1 ℃

AfterSalesService :

• constant temperature water bath