Tianlian Communication Cable HYAT2225 * 2 * 0.5 with complete specifications

Description :

　　Development and Reflection on Fiber Optic Cable and Communication Cable Technology 1. Expand the transmission capacity of a single wavelength. Currently, the transmission capacity of a single wavelength has reached 40Gbit/s, and research on 160Gbit/s has begun. Transmission above 40Gbit/s will pose certain requirements for PMD in optical fibers. At the ITU-TSG15 conference in 2002, the United States proposed the introduction of a new fiber category (G.655. C) for 40Gbit/s systems and suggested in-depth exploration of some issues in PMD transmission. Perhaps in the near future, a specialized 40Gbit/s fiber type will emerge.

　　2. Realizing ultra long distance transmission and relay free transmission is the ideal for backbone transmission networks. Currently, some companies have been able to use dispersion equalization technology to achieve relay free transmission of 2000-5000km. Some companies are further improving their fiber optic specifications by adopting Raman optical amplification technology, which can greatly extend the distance of optical transmission.

　　3. To adapt to the application of DWDM technology, the 2 × 2.5Gbit/s DWDM system has been implemented, and the 64 × 2.5Gbit/s and 32 × 10Gbit/s systems are under development and have made good progress. The widespread use of DWDM systems has raised higher requirements for the nonlinear performance of optical fibers. The ITU-T standard for the nonlinear properties and testing methods of optical fibers (G.650.2) has recently been completed. Once the nonlinear testing indicators of optical fibers are clear, corresponding indicators will be proposed for the effective area of optical fibers, especially for the further improvement of the nonlinear characteristics of G.655 optical fibers.

　　Tianlian Communication Cable HYAT2225 * 2 * 0.5 with complete specifications

　　Complete knowledge of wires and cables 1. Example: Main cable 70mm2, calculated current 220A, voltage drop V0=0.36X10-3V/A.m

　　2. Three phase allowable length L=19/√ 3x200x0.36x10-3=130m

　　3. The concept of wires and cables and the distinction between wires and cables: Regarding the daily maintenance and management of communication fiber optic cable lines, relevant reference materials 1. Prevention of communication fiber optic cable line failures. In order to reduce the occurrence of communication fiber optic cable line failures and do a good job in communication fiber optic cable line maintenance, it is necessary to strictly implement the policy of "prevention first, combination of prevention and control", carefully maintain, scientifically manage, keep equipment intact and in good condition, maintain good transmission quality, prevent line failures and eliminate them as soon as possible

　　2. Preventive maintenance is carried out according to predetermined cycles and prescribed standards For the daily maintenance of communication optical cable lines, each person can be responsible for managing 40-50 kilometers of optical cable lines, mainly responsible for guarding the identification of the lines, external disturbances, etc

　　3. Controlled maintenance mainly utilizes detection equipment and manual testing data to compare and predict the changes in fiber optic curves, in order to avoid the occurrence of faults

　　4. Corrective maintenance mainly involves correcting and repairing faults, which is carried out after a fault occurs, with the aim of restoring the equipment to its original performance This task will be completed by the emergency repair team Corrective maintenance requires a strong emphasis on not only relying on OTDR test curves and data when a fault occurs, but mainly on on-site investigation. Investigation and visits should be conducted to understand the terrain, landforms, engineering construction, and changes in the surrounding environment of the optical cable line, as well as to speed up the handling of the fault

　　5. For the fault testing of communication optical cables, the staff should have a clear understanding of the transmission performance of the communication optical cable lines in order to timely detect and handle abnormalities. Regular and irregular testing should be conducted on the optical fibers, with the main fiber being tested once a year. Irregular testing may be determined as needed. When a suspicious channel is found, fiber adjustment testing can be conducted at any time The testing content mainly includes: the backscatter signal curve of the fiber optic line and the quality inspection of the connector The testing method generally adopts the backward method, and the OTDR instrument can simultaneously complete the above testing content To check the attenuation of the fiber optic line, compare its test results with the completion test records and previous periodic test records of the line The backscatter signal curve of the fiber optic line is mainly observed for any abnormalities in the curve, such as large step losses outside the joint and excessive joint losses

　　Tianlian Communication Cable HYAT2225 * 2 * 0.5 with complete specifications

AfterSalesService :

• Communication cable HYA