Manufacturer of HYAT20 * 2 * 0.7 long-distance symmetrical cable from Tianlian

Description :

　　Complete knowledge of wires and cables 1. Example: Main cable 70mm2, calculated current 220A, voltage drop V0=0.36X10-3V/A.m

　　2. Three phase allowable length L=19/√ 3x200x0.36x10-3=130m

　　3. The concept of wires and cables and the distinction between wires and cables: Regarding the daily maintenance and management of communication fiber optic cable lines, relevant reference materials 1. Prevention of communication fiber optic cable line failures. In order to reduce the occurrence of communication fiber optic cable line failures and do a good job in communication fiber optic cable line maintenance, it is necessary to strictly implement the policy of "prevention first, combination of prevention and control", carefully maintain, scientifically manage, keep equipment intact and in good condition, maintain good transmission quality, prevent line failures and eliminate them as soon as possible

　　2. Preventive maintenance is carried out according to predetermined cycles and prescribed standards For the daily maintenance of communication optical cable lines, each person can be responsible for managing 40-50 kilometers of optical cable lines, mainly responsible for guarding the identification of the lines, external disturbances, etc

　　3. Controlled maintenance mainly utilizes detection equipment and manual testing data to compare and predict the changes in fiber optic curves, in order to avoid the occurrence of faults

　　4. Corrective maintenance mainly involves correcting and repairing faults, which is carried out after a fault occurs, with the aim of restoring the equipment to its original performance This task will be completed by the emergency repair team Corrective maintenance requires a strong emphasis on not only relying on OTDR test curves and data when a fault occurs, but mainly on on-site investigation. Investigation and visits should be conducted to understand the terrain, landforms, engineering construction, and surrounding environmental changes of the fiber optic cable line, and accelerate the handling of the fault

　　5. For the fault testing of communication optical cables, the staff should have a clear understanding of the transmission performance of the communication optical cable lines in order to timely detect and handle abnormalities. Regular and irregular testing should be conducted on the optical fibers, with the main fiber being tested once a year. Irregular testing may be determined as needed. When a suspicious channel is found, fiber adjustment testing can be conducted at any time The testing content mainly includes: the backscatter signal curve of the fiber optic line and the quality inspection of the connector The testing method generally adopts the backward method, and the OTDR instrument can simultaneously complete the above testing content To check the attenuation of the fiber optic line, compare its test results with the completion test records and previous periodic test records of the line The backscatter signal curve of the fiber optic line is mainly observed for any abnormalities in the curve, such as large step losses outside the joint and excessive joint losses

　　Manufacturer of HYAT20 * 2 * 0.7 long-distance symmetrical cable from Tianlian

　　Advantages of power line broadband carrier communication method: 1. Broadband carrier is based on widely validated TCP/IP network technology, with complete link layer and network layer data protection and verification, far from being comparable to various lightweight node organization and relay algorithms.

　　2. Broadband carrier communication has a high speed and can complete data transmission in a very short time, greatly reducing the impact of sudden interference. Even if communication fails once, it can be quickly resent to ensure data reliability.

　　3. Most broadband carrier chips are manufactured based on high-performance 32-bit cores and DSP technology, which have advantages in both technical level and performance.

　　4. In addition to data encryption at the application layer, broadband carriers support high-strength encryption algorithms such as DES, 3DES, AES at the link layer, ensuring high data communication security.

　　5. Even in communication distances where narrowband carriers have advantages, broadband carriers can fully meet the application needs of most areas through high-performance modulation methods such as OFDM and a well-established relay networking mechanism.

　　6. Broadband carrier communication has high performance, fast speed, and strong scalability, and can load various network applications. However, its cost has not increased much compared to narrowband carriers, making it cost-effective.

　　Manufacturer of HYAT20 * 2 * 0.7 long-distance symmetrical cable from Tianlian

AfterSalesService :

• Long distance symmetrical cable HYA