Nanjing telephone cable mining communication tension cable MHYBV-7-2

Description :

　　A communication cable is a communication line composed of multiple insulated wires or conductors twisted into a cable core and an outer sheath that protects the cable core from moisture and mechanical damage. In particularly harsh environments, a protective layer can be installed outside the communication cable sheath if necessary.

　　Mining cable control core:

　　1. Increase the flexibility of coal mining machine cables used in coal mines;

　　2. Increase the relative slippage of the control wire core;

　　3. Increase the strength of cable conductors for coal mining machines used in coal mines;

　　4. Changing the conductor from the original bundle twisting structure to regular twisting can increase its bending performance, and then weaving steel wires outside the conductor to increase its strength;

　　5. The control wire core can be woven with a mixture of tinned copper wire and steel wire, which is also a good method.

　　Requirements for fixed laying of high-voltage cables for mining cables:

　　1. PVC insulated thick steel wire armored PVC sheathed power cables and cross-linked polyethylene insulated thick steel wire armored PVC sheathed power cables should be used in vertical shafts or tunnels with an inclination angle of 45 ° or more;

　　2. In horizontal tunnels or shafts with an inclination angle of less than 45 °, PVC insulated steel strips or fine steel wire armored PVC sheathed power cables, cross-linked ethylene steel strips or fine steel wire armored PVC sheathed power cables should be used;

　　3. Aluminum core cables can be used in the air intake inclined shaft, underground parking lot and its vicinity, and between the substation and the mining area substation; Copper core cables must be used in other locations;

　　4. Fixed low-voltage cables should use Mw armored or unarmored cables or mobile rubber sheathed flexible cables of corresponding voltage levels;

　　5. Non fixed high and low voltage cables must use rubber sheathed flexible cables that comply with the Mr818 standard. Mobile and handheld electrical equipment should use rubber sheathed cables;

　　6. Cables used for lighting, communication, signaling, and control should be armored communication cables, rubber sheathed cables, or M-type, factory type plastic cables;

　　7. Aluminum cores should not be used for low-voltage cables, and aluminum cores are strictly prohibited for low-voltage cables in mining areas.

　　Characteristics of using mining cables:

　　1. The rated voltage U0/U of the power frequency is 380/660V, 660/1140V, 1.9/3.3kv, 3.6/6kv, 6/10KV, 8.7/10KV, 300/500V;

　　2. The high allowable working temperature for cable conductors is 65 ℃ and 90 ℃;

　　3. The cable allows a low working environment temperature of -35 ℃;

　　4. Cable bending radius: not greater than 6 times the outer diameter of the cable.

　　Selection of Mining Cables:

　　In the mine power supply system, high-voltage power supply lines generally use armored cables, which have a much lower failure rate compared to low-voltage power supply. The power supply in mining areas is a weak link in the power supply system, and the working environment is poor. Therefore, how to choose the type and cross-section of cables is related to the safety of power supply operation. The following introduces the selection of cables and the method of selecting cable cross-sections.

　　Tianjin Cable Factory Branch, with the spirit of unity, pragmatism, dedication, and dedication, has gained a high reputation in the market through the hard work and active exploration of all employees. Welcome customers to join hands with our company for contracts, mutual benefit, and common development!

AfterSalesService :

• Mining communication tension cable