Vertical single-stage fire pump
Category:
chemical industry/pump/centrifugal pump
Model:
XBD5.0/20G-15KW
Brand:
Zhengji Pump Manufacturing Co., Ltd
model:
XBD5.0/20G-15KW
Number of impellers:
single-stage
Processing & Customization:
yes
material:
cast iron
input power:
fifteen
output power:
fifteen
rated speed:
two thousand and nine hundred
Diameter of suction port:
eighty
outlet diameter:
eighty
weight:
one hundred and fifty
Place of Origin:
Zibo, Shandong
manufacturer:
Boshan Multipurpose Pump Factory
Retail Price
2,800.00USD
重量
kg
- Product Description
-
model XBD5.0/20G-15KW
Number of impellers single-stage
Processing & Customization yes
material cast iron
input power fifteen
output power fifteen
rated speed two thousand and nine hundred
Diameter of suction port eighty
outlet diameter eighty
weight one hundred and fifty
Place of Origin Zibo, Shandong
manufacturer Boshan Multipurpose Pump Factory
Description :
XBD-ISG single-stage single suction fire pump:
1. Overview: XBD-ISG series single-stage vertical, single suction centrifugal fire pump, mainly used for industrial and urban fire water supply
This product has the characteristics of strong usability and wide range of performance parameters; Easy installation, low vibration, and low noise. Its notable features are reliable sealing, high efficiency, long service life, and cost savings. This series of pumps has a working pressure of 1.6Mpa and a pump body
The static pressure test pressure is 2.4Mpa. If there are special requirements, please specify them when ordering
This series of pumps follows the standard GB6245-1998 "Performance Requirements and Test Methods for Fire Pumps"
2. Model significance
Such as XBD3. 2/10-ISG80-160 AJDYB
XBD --------- Motor driven fire pump set
3.2- Rated pressure is 0.32Mpa
The rated flow rate of the pump is 10L/s
ISG - Single stage vertical centrifugal fire pump
80------- The inlet and outlet diameter of the pump is 80 (mm)
The nominal diameter of the impeller is 160 (mm)
A -------- Cutting of impeller
J-speed reduction work
DYB feature identification
The rotation direction of the pump is clockwise when viewed from the motor end.
3. Structural description
The XBD-ISG pump is a vertical structure, with its inlet and outlet ports located on the same horizontal line
Adopting the Y series electric motor, it is elastically connected to the pump to transmit power
Pump shaft: stainless steel or carbon steel and low noise rolling bearings are selected; Enhanced the service life of the shaft and reduced noise.
Pump cover: Carefully designed. The same pump cover can be equipped with both mechanical seals and packing seals
Mechanical seal: Made in China, the high-pressure mechanical seal has a long operating life, no leakage, no wear on the shaft, no accumulation of water and dirt, ensuring a clean working environment.
Pressure tap: Install pressure gauge or vacuum pressure gauge.
Pump body: The extrusion chamber and suction vortex chamber are made of excellent hydraulic models, which are both beautiful and efficient. They are equipped with installation feet for easy installation and smooth operation.
Drain hole: used for draining water when the pump is not in use
Air release valve: When injecting water, exhaust the air inside the pump to ensure the normal start of the pump
Impeller: Made of bronze or cast iron, the cast iron parts have undergone corrosion resistance tests. The hydraulic model using IS type pump impeller has the characteristics of high efficiency and no hump in the performance curve.
Coupling: An elastic coupling is used between the pump shaft and the motor, which can automatically compensate for the different axial degrees between the pump and the motor, greatly improving the service life of the pump.
AfterSalesService :
Key words:- Vertical single-stage fire pump
More Products
