Customizable TPU hot melt film equipment/hot melt film casting machine
Category:
Rubber and plastic/Plastic machinery/Plastic rolling machine
Model:
L1600
Brand:
Jinwei/JWELL
Retail Price
1,200,000.00USD
重量
kg
- Product Description
-
Description :
Hot melt adhesive film is a thin film of hot melt adhesive formed by melting hot melt adhesive particles and applying them through a high-precision coating head. The product appearance is similar to double-sided tape, with a protective paper attached to the bottom layer and no adhesive on the layer.
Hot melt adhesive film is non stick to hands at room temperature, and can be used like applying double-sided tape, except that there is an additional heating process,
1. Facing the adhesive surface towards the material C that needs to be bonded, equipment such as an iron, ironing machine, hot composite roller, high-frequency, infrared heater, etc. can be used to heat the adhesive surface through protective paper, melting it and bonding it to the surface of the material C that needs to be bonded.
2. After cooling, tear off the protective paper, and the surface of material C will be covered with a layer of hot melt adhesive. Then, stack the material C with adhesive and the material D that needs to be bonded together. After heating and cooling, the two materials will be firmly bonded together.
3. You can also directly tear off the protective paper of the hot melt adhesive film, place the adhesive layer between materials C and D, heat and cool them, and then the two materials will bond together.
Main components: Modified polyurethane
Product appearance: Hot melt adhesive film layer non adhesive release paper (rolled, rolled)
Regular widths: 48cm, 50cm, 100cm, 138cm, 150cm Other widths can be customized
Conventional thickness: 0.04mm, 0.06mm, 0.08mm, 0.10mm, 0.12mm, 0.15mm, 0.18mm
Length of each roll: 100 meters, 100 yards, 200 yards, 300 yards or according to customer requirements
Melting temperature: 70-80 ℃, 120-130 ℃, 140-150 ℃
Pressing temperature: 90-110 ℃, 140-150 ℃, 160-170 ℃
Pressing time: 10-15 seconds
Application, domain: outdoor sportswear, clothing trademark bonding, clothing accessories, production of underwear, bras, and panties, production of e-book covers and tablet bags, seamless clothing with seamless shoe uppers, composite heating materials,
AfterSalesService :
Key words:- Customizable TPU hot melt film equipment
