Anhui acid resistant brick prices: acid resistant brick manufacturers that ship nationwide

Description :

Anhui acid resistant brick price, acid resistant brick manufacturer L that ships nationwide

Every failure is a foreshadowing of success; Every test brings a harvest; Every tear brings a realization; Every hardship holds the wealth of life. Every pain is a pillar of growth.

Zhongguang Acid Resistant Ceramics Co., Ltd. in Jiaozuo City, Henan Province is a manufacturer of acid resistant tiles. We have summarized the following precautions when using acid resistant tiles:

1. It is important to pay attention to whether acid resistant tiles need to be tiled or laid in a uniform direction. The cutting of tiles must be accurate, and the joints at door frames, cabinet edges, etc. must be tight, with even gaps.

2. Before laying acid resistant bricks, they should be soaked in water and dried to achieve external dryness and internal wetness, with no water marks on the surface. They should be selected for color use.

3. Before pasting, a cross line should be drawn in both horizontal and vertical directions. When pasting, it is necessary to ensure that the horizontal and vertical lines are connected and not sewn incorrectly.

4. The jointing shall be carried out before completion, and the joint shall be cleaned first. White cement and talcum powder shall be used to mix putty, and the jointing putty shall be 1mm lower than the brick surface.

After the completion of tile laying, after checking for flatness errors, hollowing, color differences, etc., cover and protect all the tiles with thick cardboard. The iron nails on the cardboard must be removed, and the cardboard must be tightly sealed with sealant to prevent debris from entering.

6. It is strictly prohibited to use water when there is no drainage or water accumulation equipment, especially to prevent the cardboard used to protect the tiles from being soaked, in order to prevent indirect pollution of the tiles.

7. When laying floor tiles, clean them as they are laid and keep them clean at all times. (Clean with cotton yarn or sawdust), and clean the cement mortar inside the brick joints. After completion, point the joints

When laying floor tiles, other workers must not contaminate or step on them manually. After the completion of the floor tiles, the joints should be cleaned within 24 hours, and maintenance should be carried out as needed.

a、 General epoxy resin, acid resistant adhesive, and acid resistant cement can be laid according to the manufacturer's product instructions mentioned above

Book construction;

b、 Clean the concrete surface with oxalic acid to achieve acid-base neutralization;

c、 Industrial ceramic acid resistant bricks, with a gap width of about 8-10mm and a gap depth that is flush with the brick thickness to prevent leakage;

After the tiling is completed, the surface should be washed with groove acid to help make it more secure.

Specification of acid resistant bricks (unit: mm):

600*600*15/20 300*300*30 300*300*20 300*300*15 200*200*15 200*200*20 200*200*30

150*150*15 150*150*20 150*150*30 230*113*15 230*113*20 230*113*30

230*113*65 150*75*15 150*75*20 150*75*30 200*200*25

We can process and customize special specifications!

AfterSalesService :

• Price of acid resistant bricks in Anhui