Ensure the supply of Zhongguan 200 acid resistant bricks throughout various industries and projects in China

Description :

Ensure the supply of Zhongguan 200 acid resistant bricks throughout various industries in China. Engineering L

Even the most powerful industry needs to advertise every day

I'm not asking you to cooperate immediately, but to let you know

I have been working in this industry all along

I didn't change my profession, didn't cheat, and persisted

You happen to need me in the brick industry!

————Henan Zhongguan Building Materials Co., Ltd

Acid resistant brick construction

Before construction, it is necessary to carry out rust removal, oil removal, and dirt removal work on the lining substrate The moisture content of the cement base should not exceed 6%, and attention should be paid to repairing uneven areas and drying them

When manually stirring, use a square headed small iron chisel to thoroughly mix the proportioned cement and potassium silicate evenly, with sufficient consistency and fluidity, and use up within 30 minutes

The temperature at the construction site should be between 15 ℃ and 33 ℃, and the relative humidity should not exceed 75%. Rainproof and sun proof shelters should be erected for outdoor construction

Brick board lining

⑴ On the prepared ground, make cross lines according to the size of acid resistant bricks Require horizontal and vertical alignment

⑵ Prepare acid resistant bricks and acid resistant mortar, mark parallel lines, and start construction

The bonding layer of the construction board is 5-7mm, and the mortar joint is 4-6mm. Acid resistant adhesive is used at a rate of 18 kilograms per square meter, which can be adjusted according to the site and the requirements of the party A. The mortar joint is generally squeezed or pointed.

When lining brick slabs, the mortar should be full and the uneven areas should be leveled by shaking with a rubber hammer When building large bricks, they should be supported to prevent displacement.

The lined equipment and floor should be cured in an environment above 15 ℃ for 14 days with one layer of masonry time. During the curing period, contact with water and steam is strictly prohibited

Be sure to add water glass in proportion and not too much!

Instructions for use: General epoxy resin, acid resistant adhesive, acid resistant cement can be used for paving. Construction can be carried out according to the manufacturer's product manual mentioned above; Clean the concrete surface with oxalic acid to achieve acid-base neutralization; Industrial ceramic acid resistant bricks, with a gap width of about 8-10mm and a gap depth that is flush with the brick thickness to prevent leakage; After the tiling is completed, the surface should be washed with groove acid to help make it more secure

On the road to success, even if there are thousands of reasons to give up, one must find a reason to persevere. What inspires, warms, and moves you is not inspirational quotes or inspirational chicken soup, but the positive and proactive daily life of loved ones and friends around you. Be sure to walk with positive and energetic people!

AfterSalesService :

• Acid resistant brick