Mask manufacturers wholesale medical surgical masks for export
Category:
Security/Respiratory protection/Disposable Face Mask
Model:
Strap type, hanging ear type
Brand:
Donper
brand:
Donper
model:
Strap type, hanging ear type
type:
surgical mask
material:
Non woven fabric+melt blown fabric
Specifications:
17.5cm*9.5cm
Scope of Application:
Epidemic areas, infectious disease wards, densely populated areas, etc
Processing & Customization:
yes
Is it imported:
No
Place of Origin:
Shandong
Retail Price
0.20USD
重量
kg
- Product Description
-
brand Donper
model Strap type, hanging ear type
type surgical mask
material Non woven fabric+melt blown fabric
Specifications 17.5cm*9.5cm
Scope of Application Epidemic areas, infectious disease wards, densely populated areas, etc
Processing & Customization yes
Is it imported No
Place of Origin Shandong
Description :
Mask manufacturers wholesale medical surgical masks for export
Shandong Zhushi Pharmaceutical Group Co., Ltd. is a manufacturer of machine size plaster patches, gel, medical devices, cleaning supplies, health food, medical materials. We provide medical protective clothing, medical isolation clothing, medical masks, medical isolation goggles, medical inspection gloves, medical hats, medical isolation shoe covers, medical isolation masks, forehead temperature guns, disinfection alcohol, hands free gel and other medical materials. The price is favorable and the quality is guaranteed. If you need it, you can contact us!
Product Name: Disposable Medical Surgical Mask
Specifications and models: 14.5cm × 9.5cm, 17.5cm × 9.5cm
Specifications: 1000 pieces/piece, 10 pieces/pack
Execution standard number: YY0469-2011*
Material: Three layers in total: surface material (polypropylene spunbond fabric); Intermediate material: filter meltblown fabric (ultra-fine fiber)
Bottom material: Polypropylene spunbond fabric
Main structural components or constituents: composed of surface layer, middle layer, bottom layer, mask strap, and nose clip. The surface material is polypropylene spunbond fabric, the middle layer material is filter meltblown fabric made by polypropylene spinning method, the bottom layer material is polypropylene spunbond fabric, the mask strap is knitted from polyester thread and a small amount of spandex thread, and the nose clip is made of bendable and formable polypropylene.
Scope of application: For clinical medical personnel to wear during invasive procedures, covering the user's mouth, nose, and jaw, providing a physical barrier to prevent direct transmission of pathogenic microorganisms, body fluids, particulate matter, etc.
Shelf life: After sterilization with ethylene oxide, it is valid for two years.
Instructions for Use:
1. Open the product packaging, take out the mask, with the nose clip facing upwards and the edge facing outwards. Gently pull the ear strap to hang the mask on both ears, avoiding hand contact with the inside of the mask.
2. Gently press the nose clip to make it fit the bridge of the nose, then hold down the nose clip. Pull down the lower end of the mask to the lower jaw, fully unfolding the folded edge.
3. Organize the wearing effect of the mask so that it can cover the user's nose, mouth, and chin, and ensure the tightness of the mask.
AfterSalesService :
Key words:- Wholesale of mask manufacturers
More Products
