Fangchenggang Shuanghong HDPE polymer self-adhesive film waterproof roll has high peeling strength
Category:
building materials/Waterproof and fireproof functional materials/Waterproof and moisture-proof materials
Model:
SH-178
Brand:
double rainbow
brand:
double rainbow
model:
SH-178
impermeability:
0.3Mpa 120min
Place of Origin:
Guangzhou
Place of Origin:
Zhejiang
Place of Origin:
Fujian
Place of Origin:
Sichuan
Place of Origin:
Shandong
Place of Origin:
Jiangxi
Place of Origin:
Shanxi
Place of Origin:
Tianjin
form:
layered
level:
Level 1
water absorption rate:
0
Elongation at break:
six hundred
tear strength:
four hundred
compliance:
six hundred
thermal conductivity:
one
Heat resistance:
eighty
Applicable Temperature:
five
purpose:
Basement floor waterproofing membrane
Packing Specification:
1.2mm 1.5mm1.7mm
Waterproof product category:
waterproof board
compressive strength:
three
tensile strength:
sixteen
shape:
rectangle
Item Number:
SH-178
Is it a cross-border source of goods:
No
manufacturer:
Guangzhou
Retail Price
15.00USD
重量
kg
- Product Description
-
brand double rainbow
model SH-178
impermeability 0.3Mpa 120min
Place of Origin Guangzhou
Place of Origin Zhejiang
Place of Origin Fujian
Place of Origin Sichuan
Place of Origin Shandong
Place of Origin Jiangxi
Place of Origin Shanxi
Place of Origin Tianjin
form layered
level Level 1
water absorption rate 0
Elongation at break six hundred
tear strength four hundred
compliance six hundred
thermal conductivity one
Heat resistance eighty
Applicable Temperature five
purpose Basement floor waterproofing membrane
Packing Specification 1.2mm 1.5mm1.7mm
Waterproof product category waterproof board
compressive strength three
tensile strength sixteen
shape rectangle
Item Number SH-178
Is it a cross-border source of goods No
manufacturer Guangzhou
Description :
Product Introduction
HDPEPolymer self-adhesive film waterproofing membraneIt is a high-performance multi-layer composite waterproof material developed by our company specifically for the construction parts that require pre laying method in underground engineering. It mainly consists of high-density polyethylene (HDPE) sheet, polymer self-adhesive film, and surface particle protective layer with special performance requirements. Before the initial setting of the post poured concrete, the concrete slowly crosslinks and meshes with the self-adhesive layer of the roll material under the action of gravity. During the cement curing process, physical adsorption and mortise and tenon action occur, making the HDPE polymer self-adhesive film waterproof roll material firmly adhered to the post poured concrete and not easy to detach.
Product Features
Mechanical properties: The material has high strength, elongation, impact resistance, puncture resistance, and scratch resistance;
Adhesive performance: The polymer self-adhesive film layer has excellent adhesive performance. It forms a fully bonded waterproof structure with the post poured structure body using the pre laid back bonding method, leaving no hidden water leakage hazards;
Aging resistance: excellent resistance to UV aging and thermal aging;
Resistance to marine environmental erosion: salt alkali resistance, resistance to chloride ion erosion;
Durability: HDPE can maintain good chemical stability and long service life in common inorganic, organic acid, alkali, salt, organic solvent, and microbial environments;
Environmental performance: Green building materials, no pollution to groundwater environment.
construction method
Pre laid anti sticking method
supporting materials
Double sided overlapping tape, single-sided sanding tape, and node sealant.
Product advantages
The pre laid anti sticking method is used for construction, truly achieving a "skin like" full adhesion waterproofing. HDPE sheet has high strength and excellent puncture resistance. After the roll is laid, the steel bars can be directly tied without a concrete protective layer, reducing construction costs and shortening the construction period.
Scope of Application
Suitable for the construction of underground engineering baseboards and side walls using external protection and internal pasting methods, as well as mining tunnels.
Product Specifications
Product Name surface material Thickness (mm) Specification (m) HDPE polymer self-adhesive film waterproofing membrane With sand 1.2, 1.5, 1.7 1*20 execution standard
The P-class requirements of GB/T23457-2017 "Pre laid Waterproof Membrane" standard.
List of Physical Performance Indicators for HDPE Polymer Self Adhesive Membrane Waterproof Roll
serial number project indicator one tensile properties Tensile force/(N/50mm) ≥ six hundred Tensile strength/MPa ≥ sixteen Membrane fracture elongation/% ≥ four hundred Phenomenon during stretching There is no separation between the adhesive layer and the main material or tire base two heat resistance 80 ℃, no slip, flow, or dripping for 2 hours three low-temperature flex Main material -35 ℃, no cracks four low-temperature flexibility Adhesive layer -25 ℃, no cracks five Oil leakage/number of sheets ≤ one six Impermeability 0.3MPa, 120min impermeable seven Size change rate/% ≤ ±1.5 eight Peel strength of post poured concrete/(N/mm) No processing ≥ one point five Immersion treatment ≥ one Surface pollution caused by sediment ≥ one UV treatment ≥ one Heat treatment ≥ one 
AfterSalesService :
Key words:- Polymer self-adhesive film waterproofing membrane
More Products
