Double Rainbow Waterproof

Home page

Manufacturer's direct supply of silane impregnating agent, silane impregnating coating, shipped on the same day

Manufacturer's direct supply of silane impregnating agent, silane impregnating coating, shipped on the same day

Category:

building materials/Wall and floor coatings/Waterproof coating

Model:

SH-F02

Brand:

double rainbow

brand:

double rainbow

model:

SH-F02

type:

Polymer waterproof coating

Properties of film-forming material:

inorganic

construction method:

spray

solid content:

thirty-five

Brush area per kilogram (twice):

three

Washability and abrasion resistance:

strong

water resistance:

strong

thinner:

lotion

tensile strength:

one

Elongation at break:

Surface drying time:

two

drying time:

five

Scope of Application:

Clear water concrete wall

Place of Origin:

Guangzhou

Place of Origin:

Zhejiang

Place of Origin:

Fujian

Place of Origin:

Sichuan

Place of Origin:

Shandong

Place of Origin:

Jiangxi

Place of Origin:

Shanxi

Place of Origin:

Tianjin

Packing Specification:

20kg /50kg

manufacturer:

Guangzhou

Retail Price

10.00USD

重量

Product Description

brand	double rainbow	model	SH-F02
type	Polymer waterproof coating	Properties of film-forming material	inorganic
construction method	spray	solid content	thirty-five
Brush area per kilogram (twice)	three	Washability and abrasion resistance	strong
water resistance	strong	thinner	lotion
tensile strength	one	Elongation at break	0
Surface drying time	two	drying time	five
Scope of Application	Clear water concrete wall	Place of Origin	Guangzhou
Place of Origin	Zhejiang	Place of Origin	Fujian
Place of Origin	Sichuan	Place of Origin	Shandong
Place of Origin	Jiangxi	Place of Origin	Shanxi
Place of Origin	Tianjin	Packing Specification	20kg /50kg
manufacturer	Guangzhou

Description :

　　◆ Product Description

　　 Isobutene triethoxysilane impregnating agent is high-purity isobutyl triethoxysilane, which can penetrate into the interior of concrete and react with air and water molecules exposed to acidic and alkaline environments to form a water repellent layer, producing waterproof, CL resistant, and UV resistant properties. Isobutene triethoxysilane impregnating agent can effectively prevent the corrosion of concrete by sunlight, acid and alkali, seawater, and salt spray, thereby protecting the internal steel reinforcement structure of concrete from corrosion. This product is mainly used for highway bridge structures, port terminals, marine engineering, overpasses, power poles, sewage treatment tanks, high-altitude areas with large temperature differences, etc. It is recommended by the national concrete anti-corrosion standards.

　　◆ Product standards

　　Purity 99%

　　Colorless and transparent

　　Density 0.88g/cm3

　　PH value 5-6

　　◆ Usage method

　　⊙ The surface of the substrate should be cleaned before use, and there should be no accumulated water, dirt, dust, oil stains, or other pollutants;

　　⊙ Construction can be carried out using tools such as spray guns, rollers, brushes, etc. The surface should be repeatedly sprayed and kept moist for at least 10 minutes until it is completely penetrated.

　　⊙ The surface should be kept as dry as possible to achieve the impregnation effect.

　　◆ Precautions

　　⊙ This product is flammable, and safety precautions should be taken. Keep away from sources of ignition, avoid impact, avoid direct sunlight, and pay attention to ventilation.

　　⊙ It is strictly prohibited to mix with water.

　　⊙ Not applicable below 4 ℃ and above 40 ℃.

　　⊙ During immersion, it should be kept clean and not splash onto other objects, plants, etc.

　　⊙ Construction personnel are required to wear goggles and protective gloves. If in contact with skin and eyes, immediately rinse with clean water.