Liquid water-soluble fertilizer production equipment mixing production line

Description :

　　Main technical parameters of mixed production line for liquid water-soluble fertilizer production equipment

　　1. User interface: DN65 material inlet pressure<0.6Mpa;

　　2. Outer diameter of canning head: ф 40mm;

　　3. Applicable bottleneck: Small 140 * 200 * 320mm; Large 260 * 290 * 500mm;

　　4. Filling range: 5-30kg;

　　5. Measurement accuracy: ± 0.2 (note: filling accuracy depends on the viscosity of the material and the continuity and stability of material supply);

　　6. Packing speed: ≤ 250 barrels per hour (5kg);

　　7. Gas source pressure: 0.6-0.7 megapascals;

　　8. Gas consumption: 120L/min;

　　9. Power supply:~380 volts, 30 hertz

　　10. Total power: 1.6KW

　　11. Weight: approximately 1000kg;

　　12. Dimensions: 8700 * 1350 * 230mm (length, width, height)

　　Liquid fertilizer water mixing system

　　working principle

　　1. The powdered raw materials in bags are manually moved to the feeding port, the feeding activity door is opened, the bag opening station fan is started, and the suction and dust collection are started or other conveying devices are used to feed the materials from the feeding port into the raw material storage bin. The suspended dust is adsorbed on the filter bag, and over time, more and more dust accumulates on the filter bag, increasing the resistance of the filter bag and reducing its passability. At this time, the PLC control system starts the pulse valve according to the thickness of the material on the filter bag, triggering the opening in sequence. The compressed air in the air bag is instantly sprayed through the pulse valve to each hole of the spray pipe, and then sprayed into the corresponding filter bag through the pipe; The filter bag rapidly expands under the reverse action of the airflow, causing the material dust accumulated on the filter bag to fall off, and the filter bag and the cleaned material to fall into the lower box. The dust accumulated on the filter bag is periodically pulsed to maintain good passability of the filter bag and ensure the continuous operation of the dust removal system.

　　2. Adding a pulse dust removal system to the powder feeding port can solve the problem of dust flying and environmental pollution caused by powder feeding, ensuring a good working environment.

　　3. The equipment composition of the bag opening station includes: feeding port, discharging port, fan suction system, bag filter, pulse blowback system, electrical control system, etc

　　4. High speed centrifugal fan selected domestically

AfterSalesService :

• Mixing equipment for liquid water-soluble fertilizer production