Kunming Liquid Fertilizer Production Equipment Liquid Fertilizer Packaging Equipment

Description :

　　Packaging process flow of unit equipment:

　　The packaging material is injected into the hot and cold cylinders (including an automatic mixing device that can be heated and insulated). The rotor pump automatically pumps the material to the high-level mixing cylinder (controlled by the mixing cylinder level). The XY-YG liquid filling machine automatically measures and fills according to the set weight. The XY series automatic packaging machine automatically forms bags (optional punching, corner insertion, exhaust and other accessory devices). The packaging machine completes automatic sealing and cutting. The CJB2000 weight sorting machine automatically detects the weight (optional equipment). The qualified weight finished product packaging is transported to the manual packing station by the finished product conveyor

　　Technical Specifications:

　　Packaging materials: uniform fine particles, low viscosity fluid materials (hot pot seasonings, soups, sauces, oil bags, butter, etc.)

　　Packaging speed: 35-45 packs/min (depending on material condition and packaging weight)

　　Measurement range: 150-200g

　　Bag size: length (50-320) x width (50-200) mm (XY-420 unit)

　　Measurement accuracy: ± 0.5-2%

　　Compressed air: 0.6Mpa 0.65m3/min

　　Allowable outer diameter of large packaging material: Φ 400mm

　　Inner diameter of roll paper core: Φ 75mm

　　Machine weight: 800Kg

　　Specify functions, processes, and equipment configurations

　　1. Process:

　　The climbing bucket elevator lifts the material into the reaction kettle - coarse and fine filters - intermediate storage tank - large barrel filling - capping - finished product output.

　　2. Equipment configuration:

　　1 set of climbing bucket elevator

　　1 set of transition bucket and bracket

　　1 set of 3 cubic reaction kettle

　　1 rotor pump and pipeline

　　1 set of dual filter (80 mesh, 150 mesh)

　　1 set of 3 cubic intermediate storage tanks

　　1 set of 4-head large barrel filling line

　　1 set of main control cabinet

　　After sales service commitment:

　　1. Factory inspection: Each product must be debugged and tested by quality inspectors before leaving the factory.

　　2. Debugging and installation: After the customer prepares the required materials and notifies our factory, we will respond within 24 hours. The debugging personnel will arrive at the location of the machine within 24 hours; If transportation is inconvenient or the journey is long, our factory personnel will arrive within 72 hours. And debug the product. After passing the debugging, the customer shall fill in their opinions and sign and stamp on the "Debugging Acceptance Report".

　　3. Operation training: Debugging personnel need to train the customer's operators until they can operate independently.

　　4. The machine comes with a one-year warranty, lifetime maintenance, and only the cost of repairing and replacing parts will be charged.

AfterSalesService :

• Kunming liquid fertilizer production equipment