Qingdao water-soluble fertilizer semi-automatic production line equipment

Description :

　　Qingdao Water soluble Fertilizer Semi automatic Production Line Equipment (1) Elevator

　　On the ground level, materials are manually pushed into the elevator to transport them to the feeding layer.

　　（2） Pre mixed system

　　After manual measurement, the material is amplified and fed into the pre mixer for automatic mixing. The horizontal screw belt mixer consists of necessary accessories such as motor reducer, mixer inlet, mixer cylinder, screw belt mixing mechanism, discharge mechanism, mixer outlet, stainless steel structure, etc.

　　1. The material is fed into the mixer, and the main control system automatically controls the mixing, unloading, and opening/closing of the material door. The length of the mixing and unloading time can be set digitally to ensure uniform mixing.

　　（3） Raw material storage bin

　　The inner walls are polished, with arch breaking devices inside and vibration devices outside.

　　（4） Static weighing system

　　1. Spiral automatic feeding device, flat screw feeding, feeding motor drives the screw to rotate and feed the weighing bin for material reduction and replenishment. The automatic feeding device is rigidly connected to the weighing bin, and the flat screw bottom cover can be easily disassembled and assembled; The support at one end of the flat screw is a clamp structure, and the feeding screw can be easily withdrawn, making it easy to clean the screw and the entire feeding device.

　　2. Stainless steel weighing sensor and its suspension system.

　　3. Weighing system support module, connected to the weighing compartment.

　　4. The scale bucket door opening and closing mechanism is made of 304 stainless steel structure and has a pneumatic switch material door. The batching system completes the batching of each material in sequence according to the set order. Start feeding the large amount of material, reduce the amount of material when approaching the target value, stop feeding when the target value is reached, complete the batching of 5 materials, receive a signal from the control system, stop feeding, automatically close the material door, and wait for the mixer to complete the discharge before starting the next batching process.

　　5. Security design. The weighing hopper material door is equipped with a dual detection device. Only when the material door is confirmed to be completely closed, will the next batch of ingredients begin; Only after the mixer has completely discharged the material will it be discharged.

　　（5） Material mixing system

　　The spiral belt mixer and horizontal spiral belt mixer used in the material mixing system consist of necessary accessories such as motor reducer, mixer inlet, mixer cylinder, spiral belt mixing mechanism, discharge mechanism, mixer outlet, stainless steel structure, etc.

　　1. The material is fed into the mixer, and the main control system automatically controls the mixing, unloading, and opening/closing of the material door. The length of the mixing and unloading time can be set digitally to ensure uniform mixing.

　　2. The mixer mixes 1000kg of material each time.

　　3. The spiral belt mixing mechanism has a unique design, allowing for three-dimensional composite movement of materials in left, right, up, and down directions, enabling rapid and uniform mixing.

　　⑴ Especially suitable for mixing viscous materials, by forcibly shearing, materials that are prone to adsorption and agglomeration can be rubbed open;

　　⑵ High mixing uniformity, which can evenly mix materials with large proportions;

　　⑶ Fast mixing speed, high efficiency, and large loading coefficient.

　　4. The mixer cylinder has good rigidity and is directly installed on the first floor through a shock absorber device.

　　5. The unloading mechanism is designed with pneumatic opening and closing doors, which can unload the material cleanly except for a small amount of material stored at the bottom of the cylinder.

　　6. The discharge port of the mixer is connected to the feed port of the silo through a discharge interface, designed for moisture-proof sealing.

　　7. Independent electrical control box, manually control the various actions of mixing start, opening the discharge door, mixing stop, and closing the material door during debugging.

　　8. All parts in contact with the material are made of 304 stainless steel

　　Qingdao water-soluble fertilizer semi-automatic production line equipment

AfterSalesService :

• Qingdao Water soluble Fertilizer Semi automatic Production Line