Equipment for converting sheep manure into liquid fertilizer in Guangxi

Description :

　　Equipment for converting sheep manure into liquid fertilizer in Guangxi

　　1 set of elevator

　　On the ground level, materials are manually pushed into the elevator to transport the raw materials to the batching platform.

　　2 raw material storage bins, 5 sets

　　5 sets of 1.0m3 raw material warehouses, made of 304 stainless steel with a thickness of 4mm, with polished inner walls and external vibration devices.

　　3 feeding port bag opening stations and 5 sets of pulse dust removal systems

　　On the second floor, materials are manually or transported through a feeding port. A small amount of pre mixed materials are manually prepared and directly fed into the pre mixed material bin through the feeding port. The feeding port is equipped with a reserved DN200 belt

　　Imported materials with flange short circuiting, dust collector interface on the top of the warehouse, anti dust bag opening station, and dust removal system.

　　（4） 5 sets of weight reduction static weighing systems

　　1. Five sets of stainless steel weighing sensors and their suspension systems.

　　3. One set of weighing system support frame, connected to the weighing suspension system, supporting the weighing hopper.

　　4. Two sets of weighing bucket door opening and closing mechanisms, made of 304 stainless steel structure, with pneumatic material opening and closing doors.

　　5. One guide plate and bracket are used to guide the material unloaded from the hopper into the mixer. The guide plate is made of 304 stainless steel and has a thickness of 4mm.

　　The batching system completes the batching of each material in the set order. Upon receiving the discharge signal from the control system, the weighing hopper's door opening and closing mechanism will activate to open the material door for discharge; The material is discharged completely and automatically shuts off

　　Material gate, start the next material discharge process. After all the materials are put away. Close the material door and signal the next process.

　　6. Security design. The weighing hopper material door is equipped with a dual detection device. Only when the material door is confirmed to be completely closed, will the next batch of ingredients begin; Ingredients should only be started after they are finished.

　　working principle

　　1. The V-shaped batching belt realizes the weight reduction scale feeding into the reaction kettle, with a fully enclosed design, and enters different reaction kettles through forward and reverse rotation. To improve the overall efficiency of water agent ingredients. Clean up and maintain

　　Convenient protection;

　　2. The centrifugal pump is designed with a stainless steel structure that meets the requirements of composite food hygiene. It can be linked with the level sensing switch of the metering high-level mixing tank to automatically control the start and stop of pumping work without manual intervention. that

　　The machine is suitable for automatic pumping of various fluids. High temperature resistance, no damage to pumped materials, smooth operation, and no noise; easy to maintain

　　3. Reactor

　　Specification 3000L, vertical, three-layer with mixing and insulation, material: The inner and outer pots are made of 304 stainless steel, the outer insulation board is made of stainless steel, and the insulation material is rock wool. Steel plate thickness: inner 5mm, jacket 4mm

　　2mm foreskin;

　　Equipment for converting sheep manure into liquid fertilizer in Guangxi

AfterSalesService :

• Equipment for converting sheep manure into liquid fertilizer in Guangxi