Wenshan annual production line for 160000 tons of drip irrigation fertilizer

Description :

　　Wenshan annual production line for 160000 tons of drip irrigation fertilizer

　　The drip irrigation fertilizer production line adopts a PLC automatic control system. The process flow design, equipment structure design, and material selection of the production line meet the requirements of anti-corrosion. The equipment can be easily cleaned, and all parts in contact with the material are made of stainless steel.

　　1、 Fully automatic batching system

　　Automatically complete the batching of several raw materials according to the set weight ratio. The batching system completes the batching of each material in sequence according to the set order and weight. Firstly, the horizontal screw machine of silo 1 feeds the weighing scale hopper, starting with large feeding. When the weight of material 1 approaches the set value, it automatically changes to fine feeding. When the weight reaches the target value, silo 1 stops feeding; Complete the batching of materials 2, 3, 4, 5 in sequence according to the same principle; Several materials have been mixed and received a discharge signal from the control system. The weighing hopper's door opening and closing mechanism is activated to open the material door for discharge; The material is discharged completely, the material door is automatically closed, and the next batching process begins.

　　Wenshan annual production line for 160000 tons of drip irrigation fertilizer

　　2、 Weighing system

　　The electronic weighing technology and highly intelligent weighing controller used have fast measurement speed, high accuracy, stable performance, and reliability. Imported 304L stainless steel without embroidery.

　　3、 Airflow transportation

　　Advantages: Large output, no residue in intermediate links

　　4、 Automatic mixing system

　　1. The prepared materials are automatically unloaded into the mixer, and the main control system automatically controls the mixing, unloading, and opening/closing of the material door. The mixing time and unloading time can be digitally set to ensure uniform mixing.

　　2. Double screw belt mixing mechanism, uniquely designed, allows for three-dimensional composite movement of materials in left, right, up, and down directions, enabling rapid and uniform mixing.

　　3. The unloading mechanism is designed with pneumatic opening and closing doors, which can unload the material cleanly except for a small amount of material stored at the bottom of the cylinder.

　　4. The loading position detection switch on the upper cover of the mixer will sound an alarm if the material level is still high when the unloading mechanism is closed.

　　5. All parts in contact with the material are made of imported 304L stainless steel.

AfterSalesService :

• Annual production of 160000 tons of drip irrigation fertilizer in Wenshan